Show simple item record

ELECTRODES - WELDING, BARE, SOLID; AND FLUXES, SUBMERGED ARC WELDING, CARBON AND LOW ALLOY STEELS

contributor authorNAVY - SH - Naval Sea Systems Command (Ship Systems)
date accessioned2017-09-04T17:07:25Z
date available2017-09-04T17:07:25Z
date copyright09/15/1989
date issued1989
identifier otherYHOLDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/130908
description abstractThis specification covers carbon and low alloy steel, solid and bare electrodes, and fluxes for submerged are welding (SAW). Intended Use: This specification covers welding materials which, when deposited on the base metals specified in 4.5, will meet the mechanical properties specified herein in the as-welded condition. MIL-EL8 electrode is intended for making welds where maximum ductility or minimum alloy content in the weld is desired, and is especially usable for heavy fillets and other welds subject to large shrinkage stresses. MIL-EL12 electrode results in higher strength than MIL-EL8 and is intended for welding carbon steel. MIL-EM12 electrode results in higher strength than MIL-EL12 and is intended for high speed welding of carbon steel. MIL-EM12K has better deoxidation properties than MIL-EM12, and is used for high speed welding of carbon and low alloy steels. MIL-EA1 electrode results in higher strength than MIL-EM12 and is intended for welding of low alloy steels. Neutral fluxes covered in this specification are intended for multiple pass welding. Active fluxes are intended for single pass welds.
languageEnglish
titleMIL-E-23765/4num
titleELECTRODES - WELDING, BARE, SOLID; AND FLUXES, SUBMERGED ARC WELDING, CARBON AND LOW ALLOY STEELSen
typestandard
page10
statusActive
treeNAVY - SH - Naval Sea Systems Command (Ship Systems):;1989
contenttypefulltext
subject keywordsActive fluxes
subject keywordsElectrodes
subject keywordsNeutral fluxes
subject keywordsWall number


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record