Show simple item record

Lessons Learned – Replacement of the Automated Wire Analyzer (AWA)

contributor authorNASA - National Aeronautics and Space Administration (NASA)
date accessioned2017-09-04T17:08:23Z
date available2017-09-04T17:08:23Z
date copyright03/01/2011
date issued2011
identifier otherYKHOEEAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/131923
description abstractAbstract:
Each payload standard mix cargo harness (SMCH) must be validated before being installed in the Orbiter. This is because the payload configuration changes with each mission. The Automated Wire Analyzer (AWA) wire tester had been in use for over 20 years and had become obsolete. Its maintenance had become unmanageable and too costly. The benefits of replacing the AWA wire tester were realized immediately. The time required to test harnesses was reduced by 80 to 90 percent. Because the replacement system offered the ability to recall all previously tested harnesses, the test data became more reliable.
languageEnglish
titleNASA-LLIS-3641num
titleLessons Learned – Replacement of the Automated Wire Analyzer (AWA)en
typestandard
page2
statusActive
treeNASA - National Aeronautics and Space Administration (NASA):;2011
contenttypefulltext
subject keywordsGround Equipment
subject keywordsGround processing and manifesting
subject keywordsMaintenance


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record