درباره ما
SMD-5962-93252
MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 1-TO-8 MINIMUM SKEW CLOCK DRIVER WITH MULTIPLEXED CLOCK INPUTS, MONOLITHIC SILICON
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T17:10:57Z | |
| date available | 2017-09-04T17:10:57Z | |
| date copyright | 35020 | |
| date issued | 1995 | |
| identifier other | YRIZDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/134549 | |
| description abstract | This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes Q and M) and space application (device class V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. The PIN shall be as shown in the following example: Device class M RHA marked devices shall meet the MIL-I-38535 appendix A specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. The device type(s) shall identify the circuit function as follows: Device type Generic number Circuit function 01 54AC2526 1-to-8 minimum skew clock driver with multiplexed clock inputs The device class designator shall be a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883 Q or V Certification and qualification to MIL-I-38535 The case outline(s) shall be as designated in MIL-STD-1835, and as follows: Outline letter Descriptive designator Terminals Package style E GDIP1-T16 or CDIP2-T16 16 Dual-in-line F GDFP2-F16 or CDFP3-F16 16 Flat pack 2 CQCC1-N20 20 Leadless-chip-carrier The lead finish shall be as specified in MIL-STD-883 (see 3.1 herein) for class M or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference. Supply voltage range (VCC) . . . . . . . . . . . . . . . . . . . . −0.5 V dc to +6.0 V dc DC input voltage range (VIN) . . . . . . . . . . . . . . . . . . . −0.5 V dc to VCC + 0.5 V dc DC output voltage range (VOUT) . . . . . . . . . . . . . . . . . . −0.5 V dc to VCC + 0.5 V dc DC input clamp current (IIK): VIN = −0.5 V . . . . . . . . . . . . . . . . . . . . . . . . . . −20 mA VIN = VCC + 0.5 V . . . . . . . . . . . . . . . . . . . . . . . +20 mA DC output clamp current (IOK): VOUT = −0.5 V . . . . . . . . . . . . . . . . . . . . . . . . . −20 mA VOUT = VCC + 0.5 V . . . . . . . . . . . . . . . . . . . . . . +20 mA DC output current (IOUT) per output pin . . . . . . . . . . . . . ±50 mA DC VCC or GND current (ICC, IGND) per pin . . . . . . . . . . . ±400 mA Storage temperature range (TSTG) . . . . . . . . . . . . . . . −65°C to +150°C Lead temperature (soldering, 10 seconds) . . . . . . . . . . . . . +300°C Thermal resistance, junction-to-case (ΘJC) . . . . . . . . . . . . See MIL-STD-1835 Junction temperature (TJ) . . . . . . . . . . . . . . . . . . . . +175°C Maximum power dissipation (PD) . . . . . . . . . . . . . . . . . . 500 mW Supply voltage range (VCC) . . . . . . . . . . . . . . . . . . . . +3.0 V dc to +5.5 V dc Input voltage range (VIN) . . . . . . . . . . . . . . . . . . . . +0.0 V dc to VCC Output voltage range (VOUT) . . . . . . . . . . . . . . . . . . . +0.0 V dc to VCC Maximum low level input voltage (VIL): VCC = 3.0 V . . . . . . . . . . . . . . . . . . . . . . . . . . 0.90 V dc VCC = 3.6 V . . . . . . . . . . . . . . . . . . . . . . . . . . 1.08 V dc VCC = 4.5 V . . . . . . . . . . . . . . . . . . . . . . . . . . 1.35 V dc VCC = 5.5 V . . . . . . . . . . . . . . . . . . . . . . . . . . 1.65 V dc Minimum high level input voltage (VIH): VCC = 3.0 V . . . . . . . . . . . . . . . . . . . . . . . . . . 2.10 V dc VCC = 3.6 V . . . . . . . . . . . . . . . . . . . . . . . . . . 2.52 V dc VCC = 4.5 V . . . . . . . . . . . . . . . . . . . . . . . . . . 3.15 V dc VCC = 5.5 V . . . . . . . . . . . . . . . . . . . . . . . . . . 3.85 V dc Case operating temperature range (TC) . . . . . . . . . . . . . . −55°C to +125°C Minimum input edge rate (ΔV/Δt) . . . . . . . . . . . . . . . . 125 mV/ns (VIN from 30% to 70% of VCC) Maximum high level output current (IOH): VCC = 3.0 V and 3.6 V . . . . . . . . . . . . . . . . . . . . . −12 mA VCC = 4.5 V and 5.5 V . . . . . . . . . . . . . . . . . . . . . −24 mA Maximum low level output current (IOL): VCC = 3.0 V and 3.6 V . . . . . . . . . . . . . . . . . . . . . 12 mA VCC = 4.5 V and 5.5 V . . . . . . . . . . . . . . . . . . . . . 24 mA Fault coverage measurement of manufacturing logic tests (MIL-STD-883, test method 5012) . . . . . . . . . . XX percent 5/ Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices. | |
| language | English | |
| title | SMD-5962-93252 | num |
| title | MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 1-TO-8 MINIMUM SKEW CLOCK DRIVER WITH MULTIPLEXED CLOCK INPUTS, MONOLITHIC SILICON | en |
| type | standard | |
| page | 19 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;1995 | |
| contenttype | fulltext |
