درباره ما
SMD-5962-90901
MICROCIRCUITS, DIGITAL, CMOS, OCTAL REGISTERED TRANSCEIVER, MONOLITHIC SILICON
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T17:14:12Z | |
| date available | 2017-09-04T17:14:12Z | |
| date copyright | 33903 | |
| date issued | 1992 | |
| identifier other | YZXWDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/137620 | |
| description abstract | This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of radiation hardness assurance (RHA) levels are reflected in the PIN. The PIN shall be as shown in the following example: Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. The device type(s) shall identify the circuit function as follows: Device type Generic number Circuit function 01 29FCT52A/54FCT52A Octal registered transceiver with three-state outputs 02 29FCT52B/54FCT52B Octal registered transceiver with three-state outputs 03 29FCT52C/54FCT52C Octal registered transceiver with three-state outputs The device class designator shall be a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883 B or S Certification and qualification to MIL-M-38510 Q or V Certification and qualification to MIL-I-38535 The case outline(s) shall be as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package type K GDFP2-F24 or CDFP3-F24 24 flat pack L GDIP3-T24 or CDIP4-T24 24 dual-in-line 3 CQCC1-N28 28 leadless chip carrier The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference. Terminal voltage range (VTERM) (referenced to ground): Inputs and VCC terminals . . . . . . . . . . . . . . . . . . . . . . −0.5 V dc to +7.0 V dc Outputs and I/O terminals . . . . . . . . . . . . . . . . . . . . . −0.5 V dc to VCC Storage temperature range (TSTG) . . . . . . . . . . . . . . . . . . −65°C to +150°C Bias temperature range (TBIAS) . . . . . . . . . . . . . . . . . . . −65°C to +135°C DC output current (IOUT) . . . . . . . . . . . . . . . . . . . . . . 120 mA Power dissipation (PD) . . . . . . . . . . . . . . . . . . . . . . . 500 mW Junction temperature . . . . . . . . . . . . . . . . . . . . . . . . +175°C Thermal resistance (ΘJC) . . . . . . . . . . . . . . . . . . . . . . See MIL-STD-1835 Lead temperature (soldering, 10 seconds) . . . . . . . . . . . . . . +275°C Supply voltage range (VCC) . . . . . . . . . . . . . . . . . . . . . 4.5 V dc to 5.5 V dc High-level input voltage (VIH) . . . . . . . . . . . . . . . . . . . 2.0 V dc minimum Low-level input voltage (VIL) . . . . . . . . . . . . . . . . . . . 0.8 V dc maximum Case operating temperature range (TC) . . . . . . . . . . . . . . . −55°C to +125°C Fault coverage measurement of manufacturing logic tests (MIL-STD-883, test method 5012) . . . . . . . . . . . XX percent 2/ Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices. | |
| language | English | |
| title | SMD-5962-90901 | num |
| title | MICROCIRCUITS, DIGITAL, CMOS, OCTAL REGISTERED TRANSCEIVER, MONOLITHIC SILICON | en |
| type | standard | |
| page | 17 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;1992 | |
| contenttype | fulltext |
