درباره ما
Browsing ISA - International Society of Automation by Issue Date
Now showing items 1-20 of 258
-
ISA RP31.1
Abstract: These recommendations cover volumetric turbine flowmeters having an electrical output. The flowmeters are used to measure either flow rate or quantity of liquids, and can be either self-generating or modulating. Their use ... -
ISA RP60.8
Abstract: This Section of ISA-RP60 is intended to assist the design engineer in establishing the electrical requirements of a control center; it is also intended to comply with the provisions of the National Electrical Code. What ... -
ISA RP2.1
Abstract: This report presents abbreviations and fundamental conversion factors commonly used in manometry, recommended definitions of pressure in terms of a column of mercury and water, and for a large number of liquids, tables of ... -
ISA 20
Abstract: These forms are intended to assist the specification writer to present the basic information. In this sense they are "short-form" specifications or "check sheets" and may not include all necessary engineering data or ... -
ISA RP60.9
Abstract: This Recommended Practice is intended to assist the designer or engineer in the definition of piping requirements for pneumatic signals and supplies in control centers. This Recommended Practice is based on current practices. ... -
ISA 67.03
Abstract: This standard covers identification and quantitative measurement of reactor coolant system leakage in light water cooled power reactors. Leak detection for gas and liquid metal cooled reactors and for containment building ... -
ISA 37.1
Abstract: This Standard covers transducers used in electrical and electronic measuring systems.
It is realized that this Standard may not be wholly suitable for transducers used in automatic control systems and in some other ... -
ISA 5.3
Abstract: This standard satisfies the requirements for symbolically representing the functions of distributed ControVshared display instrumentation, logic, and computer systems. The instrumentation is generally composed of field ... -
ISA RP60.6
Abstract: This Recommended Practice is intended to summarize identification methods and to suggest the uses of nameplates, labels, and tags. Examples are included for guidance in preparing drawings and specifications. (See Appendix ... -
ISA RP74.01
Abstract: Purpose and scope
The purpose of this recommended practice is to furnish design criteria inducive to simplified specifications and to provide recommendations for installation, calibration, and maintenance ... -
ISA 5.5
Abstract: The standard is suitable for use in the chemical, petroleum, power generation, air conditioning, metal refining, and numerous other industries.
Though the standard may make use of standard symbols now used for piping ... -
ISA 71.01
Abstract: This standard covers temperature and humidity environmental conditions for industrial process measurement and control equipment. Specifications for other environmental conditions are beyond the scope of this standard. ... -
ISA RP60.3
Abstract: The intent of this recommended practice is to present design concepts which are compatible with the physical and mental capabilities of the control center operator while recognizing any of the operator's limitations.
The ... -
ISA 82.03
Abstract: This standard applies to electrical, electronic (analog/digital) and electromechanical process measurement and control equipment which:
1) measures and controls directly or indirectly an industrial process through a ... -
ISA 12.10
Abstract: This standard refers only to combustible mixtures created by dusts — such as agricultural, carbonaceous, plastic, chemical, and metal dusts. Such materials are classified in NEC ® Article 500 as Class ... -
ISA 75.17
Abstract: This standard establishes a method to predict the noise generated in a control valve of standard design by the flow of compressible fluid and the resulting noise outside of the pipe and downstream of the valve. The ... -
ISA RP60.1
Abstract: This portion of ISA-RP60 is intended to be used as a guide in the preparation of engineering designs and specifications for control center facilities (see 1.2).
Because of the wide variety of industries using control ... -
ISA RP60.4
Abstract: This recommended practice covers the type, content, and extent of documentation required as record data and information particular to a control center and control center facility. It is written to provide guidelines covering ... -
ISA 71.02
Abstract: This standard classifies power parameters that affect industrial process measurement and control equipment. Specifications for other environmental conditions are beyond the scope of this standard.
The classes of ... -
ISA 5.4
Abstract: Additional information for individual loop. This standard establishes minimum required information and identifies additional optional information for a loop diagram for an individual instrumentation loop. ...