درباره ما
Browsing ISA - International Society of Automation by Title
Now showing items 1-20 of 258
-
ISA 100.11A
Abstract: This project will define the OSI layer specifications (e.g., PhL, DL, etc.), security specifications, and management (including network and device configuration) specifications for wireless devices serving application ... -
ISA 107.1
Abstract: This standard presents the file format to be utilized for data acquired by a revolution-based tip timing data system. It provides the following:
• All header information needed to describe the contents of the ... -
ISA 12.00.02
Abstract: This standard defines minimum elements and format for certificates for AEx equipment to align with those for the IECEx Certificate of Conformity.
NOTE 1 — This standard may be used for other than AEx equipment ... -
ISA 12.01.01
Abstract: This document provides general guidance for safe design, installation, and maintenance of electrical equipment in hazardous (classified) locations using appropriate means to prevent ignition of flammable gases and vapors, ... -
ISA 12.02.02
Abstract: This document provides guidance in the preparation of control drawings for intrinsically safe apparatus, associated apparatus, and intrinsically safe systems.
This document is intended to be used in conjunction with ... -
ISA 12.04.04
Abstract: This standard applies to equipment made suitable for use in hazardous (classified) locations by pressurizing the use of a pressurizing system.
This standard applies both to equipment with and without an internal ... -
ISA 12.10
Abstract: This standard refers only to combustible mixtures created by dusts — such as agricultural, carbonaceous, plastic, chemical, and metal dusts. Such materials are classified in NEC ® Article 500 as Class ... -
ISA 12.12.01
Abstract: Applicable to Class I and II, Division 2 and Class III, Divisions 1 and 2 locations
This standard applies only to equipment, circuits, and components for use in Class I and II, Division 2 and Class ... -
ISA 12.12.01
Abstract: This standard applies only to equipment, circuits, and components designed specifically for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations as defined in the National ... -
ISA 12.12.03
Abstract: This standard applies to both body-worn and hand-held portable electronic products for use in Class I and II, Division 2, Class I, Zone 2, and Class III, Division 1 and 2 Hazardous (Classified) Locations which are not ... -
ISA 12.13.01
Abstract: This part of ANSI/ISA-12.13.01 (IEC 61779-1 through 5 Mod) specifies general requirements for construction and testing and describes the test methods that apply to portable, transportable and fixed apparatus for the ... -
ISA 12.13.04
Abstract: This standard provides minimum requirements for fixed and transportable open path gas detection apparatus.
This standard specifies the construction, performance and testing of open path (line-of-sight) gas monitors ... -
ISA 12.20.01
Abstract: This standard provides minimum construction and test requirements in addition to manufacturer installation and maintenance recommendations for the safe operation of ignition systems and components for spark-ignited ... -
ISA 12.27.01
Abstract: This document provides specific requirements for process sealing between electrical systems and flammable or combustible process fluids where a failure could allow the migration of process fluids directly into the electrical ... -
ISA 18.1
Abstract: This Standard is primarily for use with electrical annunciators that call attention to abnormal process conditions by the use of individual illuminated visual displays and audible devices. Annunciators can range from a ... -
ISA 18.2
Abstract: General Applicability
This standard addresses alarm systems for facilities in the process industries to improve safety, quality, and productivity. The general principles and processes in this standard ... -
ISA 18.2
Abstract: Scope: General applicability This standard specifies general principles and processes for the lifecycle management of alarm systems based on programmable electronic controller and computer -based human-machine interface ... -
ISA 20
Abstract: These forms are intended to assist the specification writer to present the basic information. In this sense they are "short-form" specifications or "check sheets" and may not include all necessary engineering data or ... -
ISA 20.00.03
Abstract: This standard establishes requirements for instrument specification forms to be published by ISA. Its use is recommended for organizations that develop their own equivalent specification forms.
The guidelines set forth ... -
ISA 37.1
Abstract: This Standard covers transducers used in electrical and electronic measuring systems.
It is realized that this Standard may not be wholly suitable for transducers used in automatic control systems and in some other ...