MIL-D-3464E

Abstract

This specification covers bagged, chemically inert, dehydrating agents that prevent corrosion and mildew by adsorbing the moisture from the air of an enclosed space. <br>The bagged desiccant shall be furnished in the following types, as specified (see <a>6.2</a>): </span><pre> Type I - General purpose. Type II - Non-dusting. Type III - For specific conditions (8 and 16 units only).</pre> <br> <br><b><u>Intended Use:</u></b> Bagged desiccants covered by this specification are intended for use in removing moisture from gases, including air, and liquids as follows: (a) Generally applicable for static dehumidification of packages and closed spaces in order to prevent corrosion, mold, or mildew. (b) Method II packaging. The use of desiccants in method II packaging is covered by MIL-P-116, which also specifies formulae for computing the proper quantity of desiccant to be used. (c) Type III desiccant in 8 and 16 unit bags is intended for use in areas where a danger exists of accidental flooding by water (200&#176;F maximum). The durability of the bag material, and seams thereof, should be sufficient to prevent contamination of a system by accidental dispersal of desiccant material. (d) Type II desiccant is intended for use in critical packaging applications where dusting cannot be tolerated. This specification is intended for use in the acquisition of new bagged desiccant. <br>