درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 2161-2180 of 39933
-
Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets
Abstract: 5.1 The objective of this practice is to provide procedures for estimating emission profiles of VOCs from bedding sets. These profiles can then be used to estimate human inhalation exposures to VOCs emitted from bedding ... -
Standard Practice for Estimation of Short-Term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
Abstract: 5.1 The objective of this practice is to provide procedures for estimation of human inhalation exposure to VOCs emitted from bedding sets in homes. The estimated inhalation exposure can be used as an input for characterization ... -
Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
Abstract: This specification covers bare bunch-stranded conductors made from round copper wires, either uncoated or coated with tin, lead, or lead-alloy for use as electrical conductors. Coated wires shall include only those wires ... -
Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
Abstract: 5.1 This test method is useful for detecting and determining organic and inorganic carbon impurities in water from a variety of sources including industrial water, drinking water, and waste water. 5.2 Measurement of these ... -
Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
Abstract: 5.1 This guide is intended to describe various methods for determining the dynamic properties of vulcanized rubber materials, and by extension, products utilizing such materials in applications such as springs, dampers, ... -
Standard Guide for Storage and Handling of Geosynthetic Clay Liners
Abstract: 4.1 For optimum performance, GCLs must be stored and handled prior to their installation in a manner that does not impact their hydraulic or physical properties, or both. Adherence to these storage and handling guidelines ... -
Standard Test Method for Determination of Area Stability of Leather to Laundering
Abstract: 3.1 The procedure is primarily intended to evaluate the ability of a leather specimen to withstand fixed, and rather strenuous, laundering conditions. This test method is not intended as a recommended washing procedure, ... -
Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
Abstract: 5.1 This standard measures the steady state thermal impedance of electrical insulating materials used to enhance heat transfer in electrical and electronic applications. This standard is especially useful for measuring ... -
Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
Abstract: 4.1 Coatings that chemically change during the curing process, such as epoxies, vinyl esters, polyesters, alkyds and urethanes, become more resistant to solvents as they cure. These coatings should reach specific levels ... -
Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers
Abstract: 5.1 This practice is intended for use in collecting samples of consolidated or compacted materials from drums or similar containers, but only in compliance with a suitable work plan prepared according to Practice D5283 and ... -
Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
Abstract: 3.1 The procedure described in this practice is designed to provide a method by which the coating weight of chromium treatments on metal substrates may be determined. 3.2 This procedure is applicable for determination of ... -
Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
Abstract: This specification covers bare rope-lay-stranded conductors having concentric-stranded members made from round copper wires, either uncoated or coated with tin, lead, or lead-alloy for use as electrical conductors. Coated ... -
Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
Abstract: 4.1 This test method is intended for use primarily as a means of comparing the performance of unitizing films. It can also be used to compare the effectiveness of different wrap cycles with the same wrapping materials. No ... -
Standard Practice for Sampling with a Dipper or Pond Sampler
Abstract: 4.1 This practice is intended for use in the sampling of surface waters and other liquids. 4.2 Dipper equipment is uncomplicated in construction, simple to use, and relatively easy to decontaminate; however, this practice ... -
Standard Test Method for Measuring Mass per Unit Area of Geotextiles
Abstract: 5.1 This test method is used to determine if the geotextile material meets specifications for mass per unit area. This test method can be used for quality control to determine specimen conformance. This measurement allows ... -
Standard Specification for Anaerobic Single-Component Adhesives (AN)
Abstract: This specification establishes the requirements for single-component anaerobic adhesives suitable for locking, sealing, and retaining threaded or cylindrical assemblies. It is intended to be a means of classifying the ... -
Standard Practice for Nitric Acid Digestion of Solid Waste
Abstract: 5.1 A knowledge of the inorganic composition of a waste is often required for the selection of appropriate waste disposal practices. Solid waste may exist in a variety of forms and contain a range of organic and inorganic ... -
Standard Guide for Determination of Static Coefficient of Friction of Test Couples Using an Inclined Plane Testing Device
Abstract: 5.1 Guide G115 lists a number of ASTM International standards that use the inclined plane test rig to measure the static coefficient of specific tribosystems. This guide applies to any material couple that can be made into ... -
Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
Abstract: 4.1 It is intended that this practice be used by manufacturers, users, and testing agencies. The use of this practice establishes a uniform procedure for the melting or heating of hot-applied sealants and fillers. It is ... -
Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
Abstract: 4.1 Waste composition information has widespread applications and can be used for activities such as solid waste planning, designing waste management facilities, and establishing a reference waste composition for use as a ...