درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 2381-2400 of 39933
-
Standard Specification for Ice Making Machines, Icemaker-Dispensers, and Ice Dispensing Equipment
Abstract: This specification covers the design, performance, and certification requirements pertinent to the construction of commercial automatic ice making machines used in manufacturing and processing ice, including the attached ... -
Standard Test Method for Burst Strength of Surgical Sealants
Abstract: 4.1 Materials and devices that function at least in part by adhering to living tissues are finding increasing use in surgical procedures, either as adjuncts to sutures and staples or as frank replacements for those devices ... -
Standard Test Methods for Foot Protection
Abstract: 4.1 These test methods contain requirements to evaluate the performance of footwear for the following: 4.1.1 Impact resistance for the toe area of footwear (I), 4.1.2 Compression resistance for the toe area of footwear ... -
Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
Abstract: This specification covers the minimum design, performance, testing, and classification requirements, and prescribes fit, function, and performance criteria for footwear designed to be worn to provide protection against a ... -
Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
Abstract: This specification establishes the requirements for polypropylene (PP) piping system components such as pipe, fittings, valves, and manifolds used in water service lines, hot-and-cold water distribution, hydronic heating, ... -
Standard Guide for Security Checkpoint Screening of Persons with Medical Devices Using Metal Detectors
Abstract: 5.1 This guide addresses the design, configuration, and operation of security checkpoints to minimize exposure of persons with PMEDs to the electromagnetic fields emitted by metal detector security systems. Guidance is ... -
Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
Abstract: 4.1 The purpose of this practice is to delineate information regarding the design, manufacture, installation, operation, and maintenance of inflatable amusement devices. -
Standard Test Method for Assessment of Circulating Blood-Contacting Medical Device Materials on Partial Thromboplastin Time (PTT)
Abstract: 4.1 The purpose of this test method is to determine the time citrated plasma exposed to medical materials takes to form a clot when exposed to a suspension of phospholipid particles and calcium chloride. In this test method, ... -
Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
Abstract: This specification covers the requirements fro wrought zirconium-2.5niobium alloy for use in surgical implant applications. The material shall be manufactured into bars or wires by multiple vacuum melting in arc furnaces, ... -
Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
Abstract: 5.1 Leaks in medical device, pharmaceutical, and food packages may result in the ingress of unwanted gases (most commonly oxygen), harmful microbiological, or particulate contaminants. Package leaks may appear as imperfections ... -
Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide
Abstract: This specification covers the material characteristics of virgin poly(glycolide) and poly(glycolide-co-lactide) resins with mole fractions within the specified range used in surgical implants. This does not cover packaged ... -
Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications
Abstract: 4.1 This guide contains a listing of those characterization parameters that are directly related to the functionality of hyaluronan. This guide can be used as an aid in the selection and characterization of the appropriate ... -
Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
Abstract: 4.1 Ethyl silicate zinc-rich primers cure by the reaction of the vehicle with moisture, thereby providing a binder for the zinc. As relative humidity and temperature vary, so does the rate of cure. A certain minimum degree ... -
Standard Terminology Relating to Tissue Engineered Medical Products
Abstract: 3.1 The need for standards regarding TEMPs has also prompted a need for definitions. This terminology sets forth definitions of the most commonly used terms and specifies the relationship among the sciences and components ... -
Standard Test Method for Determining the Initial Efficiency of Materials to Penetration by Particulates Using Latex Spheres
Abstract: 5.1 This test method measures the initial filtration efficiency of materials by sampling representative volumes of the upstream and downstream latex aerosol concentrations in a controlled airflow chamber. 5.2 This test ... -
Standard Practice for Design of Amusement Rides and Devices
Abstract: 4.1 The purpose of this practice is to provide designers, engineers, manufacturers, owners, and operators with criteria and references for use in designing amusement rides and devices or a major modification for amusement ... -
Standard Test Method for Measuring Load-Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
Abstract: 5.1 Intervertebral body fusion devices are generally simple geometric-shaped devices, which are often porous or hollow in nature. Their function is to support the anterior column of the spine to facilitate arthrodesis of ... -
Standard Test Method for Strength Properties of Tissue Adhesives in Tension
Abstract: 4.1 The utility, range, and efficacy of adhesives in clinical medicine are well documented in the literature. Whether being used as an adhesive, hemostatic, sealant, or carrier for drugs or growth factors, or both, the ...