درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 2461-2480 of 39933
-
Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
Abstract: 4.1 This test method provides a laboratory test for determining the relative carpet dirt removal effectiveness of residential central vacuum cleaning systems when tested under standard conditions and on representative types ... -
Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
Abstract: This specification covers the chemical, mechanical, and metallurgical requirements for wrought annealed, cold worked, or hot rolled titanium-6aluminum-7niobium alloy (UNS R56700) bar and wire to be used in the manufacture ... -
Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
Abstract: 4.1 The test results enable the comparison of A-weighted sound emission from vacuum cleaners, backpack vacuum cleaners, extractors, or hard-floor cleaning machines when tested under the condition of this test method. -
Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)
Abstract: This specification covers UNS S31673 chromium-nickel-molybdenum wrought annealed stainless steel surgical fixation wires. The wires should conform to the required values of tensile strength and elongation. Wire surfaces ... -
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
Abstract: This specification covers coextruded cross linked polyethylene composite pressure pipe with welded aluminum tube reinforcement between the inner and outer layers. The inner and outer cross linked polyethylene layers are ... -
Standard Specification and Test Methods for Intramedullary Fixation Devices
Abstract: A1.4 Significance and Use A1.4.1 This test method describes a static bending test to determine the bending stiffness and bending strength of the central and uniform portions of an IMFD. A1.4.2 This test method may not be ... -
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
Abstract: 4.1 This practice is for use by designers and specifiers, regulatory agencies, owners, and inspection organizations who are involved in the rehabilitation of conduits through the use of a resin-impregnated tube inverted ... -
Standard Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiation of Semiconductor Devices
Abstract: 5.1 Many modern integrated circuits, power transistors, and other devices experience SEP when exposed to cosmic rays in interplanetary space, in satellite orbits, or during a short passage through trapped radiation belts. ... -
Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
Abstract: 3.1 The purpose of this practice is to provide the minimum manufacturing requirements for amusement rides and devices and to provide the minimum requirements for a written quality assurance program for an amusement ride ... -
Standard Guide for Neutron Irradiation of Unbiased Electronic Components
Abstract: 5.1 Semiconductor devices can be permanently damaged by neutrons (1, 2).6 The effect of such damage on the performance of an electronic component can be determined by measuring the component’s electrical characteristics ... -
Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
Abstract: 4.1 The degradation of optical properties of transparent plastics is the single greatest cause for in-service removal and replacement. Some optical qualities are inherent in the geometry, manufacturing process, and materials, ... -
Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
Abstract: 5.1 Anionic surfactants are the most widely used of the synthetic detergents. ASTM methods in current use for their determination involve two-phase aqueous/chloroform titrations with the organic dyes methylene blue (Test ... -
Standard Practices for Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles, Ensemble Elements, and Other Components
Abstract: 5.1 These practices establish standard procedures designed for qualitatively evaluating the performance characteristics of protective ensembles or ensemble elements in terms of comfort, fit, function, and durability. Limited ... -
Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
Abstract: 5.1 The tensile test method is recommended for tension testing of calcium phosphate/substrate or porous metal coating/substrate combinations and can provide information on the adhesive or cohesive strength of coatings under ... -
Standard Test Method for Corrosion of Surgical Instruments
Abstract: 3.1 This test method provides corrosion test methodologies and means of evaluation that serve as indicators of proper material selection and proper processing by the manufacturer. Note 1: It is recommended that instruments ... -
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
Abstract: 5.1 This test method is normally used to evaluate the barrier effectiveness against penetration of liquids through materials, seams, closures, or other planar assemblies used in protective clothing and specimens from ... -
Standard Practice for Permanent Marking of Orthopaedic Implant Components
Abstract: 3.1 It is common practice for orthopaedic implant manufacturers to apply permanent identification to implant components. In this regard, Practice F86 describes recommended locations and methods of marking for metallic implants. -
Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials
Abstract: 5.1 This guide establishes recommended lists of challenge chemicals to encourage those who evaluate chemical protective clothing materials to test chemicals in common. The lists will facilitate the comparison of data from ...