درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 2661-2680 of 39933
-
Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolley Wire for Industrial Haulage
Abstract: This specification deals with figure-9 deep-section grooved and figure-8 copper trolley wire for use in industrial haulage. The material shall conform to the required tensile properties: tensile strength and elongation. ... -
Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
Abstract: 4.1 Procedure A measures the ability of a pressure-sensitive tape to adhere to a standard steel panel under constant stress. This may or may not relate to the ability of the tape to adhere to other surfaces. 4.2 Procedures ... -
Standard Practice for Manufacturing Characterization of Computed Radiography Systems
Abstract: 4.1 There are several factors affecting the quality of a CR image including the basic spatial resolution of the IP system, geometrical unsharpness, scatter, and contrast sensitivity. There are several additional factors ... -
Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations
Abstract: 5.1 The procedure in this test method is used to evaluate the effectiveness of a test reagent (antimicrobial agent/active ingredient) or formulation to reduce or completely kill bacterial populations on contaminated fabrics ... -
Standard Guide for Design of Earthen Wall Building Systems
Abstract: 5.1 Historical Overview—Earthen building systems have been used throughout the world for thousands of years. Adobe construction dates back to the walls of Jericho which were built around 8300 B.C. Many extant earthen ... -
Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
Abstract: 5.1 This practice is intended to provide a standard set of guidelines that are to be followed when conducting and reporting on inspections of installed fire resistive joint systems. 5.2 This practice is intended to provide ... -
Standard Test Method for Mass Loss, Residue, and Temperature Measurement Validation of Thermogravimetric Analyzers
Abstract: 5.1 This test method may be used to validate the performance of a specific thermogravimetric analyzer. 5.2 This test method may be used to validate the performance of a specific method based upon a thermogravimetry mass ... -
Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
Abstract: 5.1 This method is intended to simulate the performance of various air barrier materials/accessories when combined into an assembly. Based upon the results of the measurements, this procedure then assigns an air leakage ... -
Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
Abstract: 11.1 The significance and use of the test methods is contained in Test Methods E2353. -
Standard Guide for Framework for a Consensus-based Environmental Decision-making Process
Abstract: 5.1 This standard guide is designed to help the owners and regulators of a specific environmental problem to identify and integrate affected stakeholders and establish a process to identify and work through all the key ... -
Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance
Abstract: 5.1 This practice provides laboratory procedures for rating the relative bioresistance of metalworking fluid formulations, for determining the need for microbicide addition prior to or during fluid use in metalworking ... -
Standard Test Method for Instrumented Impact Testing of Metallic Materials
Abstract: 5.1 Instrumented impact testing provides an independent measurement of the absorbed energy associated with fracturing CVN or MCVN specimens for test machines equipped with a dial or optical encoder, or both. 5.2 Instrumented ... -
Standard Guide for Integration of Ergonomics/Human Factors into New Occupational Systems
Abstract: 5.1 Integrating ergonomic principles into new occupational systems may help businesses develop processes that do not exceed worker capabilities and limitations. 5.2 Jobs and tasks that conform to worker capabilities and ... -
Standard Practice for Effect of Water on Asphalt-Coated Aggregate Using Boiling Water
Abstract: 5.1 This practice is useful as an indicator of the relative susceptibility of asphalt-coated aggregate to water, but should not be used as a measure of field performance because such correlation has not been established. ... -
Standard Test Method for Paired Preference Test
Abstract: 5.1 The paired preference test determines whether or not there is a preference for one product over another product among a specific target population. Knowledge of consumer segments, brand loyalties, the range of product ... -
Standard Guide for Repointing (Tuckpointing) Historic Masonry
Abstract: 4.1 Repointing masonry improves weather resistance, reduces water penetration, maintains structural and visual integrity, and prolongs the life of the building by allowing a mortar joint to shed water and avoid the ... -
Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
Abstract: 5.1 Fenestration products, when exposed to differential temperatures (constant higher or lower temperatures on the exterior and room temperature on the interior), or temperature cycling (relatively constant room temperature ... -
Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants
Abstract: 5.1 The procedure in this test method is used to evaluate the activity of a test reagent (antimicrobial agent/active ingredient) or formulation in the reduction or complete kill of the bacterial population in fabric and ... -
Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
Abstract: 5.1 This fire test is applicable to a description of certain fire performance characteristics in appraising wall and ceiling materials, products, or systems under specified fire-exposure conditions in an enclosure. The ... -
Standard Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms for Petroleum Service
Abstract: 5.1 Inspection, repair, and construction of ASTs in petroleum service should follow at a minimum the requirements of API 650 and API 653. These standards describe methods for testing the weld quality and structural and ...