درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 3301-3320 of 39933
-
Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
Abstract: 3.1 This test method is particularly applicable to the measurement of free films and is also satisfactory for the measurement of films on laboratory test panels. 3.2 The accuracy and precision of the thickness measurements ... -
Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
Abstract: 5.1 This test method is used to differentiate between greases having high, medium, and low wear preventive properties using oscillating motion. The user of this method should determine to his own satisfaction whether results ... -
Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
Abstract: 5.1 Knowledge of the concentration of benzene may be required for regulatory use, control of gasoline blending, and/or process optimizations. -
Standard Practice for Random Sampling of Construction Materials
Abstract: 4.1 This practice is useful for determining the location or time, or both, to take a sample in order to minimize any unintentional bias on the part of the person taking the sample. Note 1: The effectiveness of this practice ... -
Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
Abstract: 5.1 It is well known that plastic test specimens molded under different conditions can have significantly different properties. This practice is designed to minimize those differences by establishing operating protocols ... -
Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
Abstract: 4.1 This specification provides the basic minimum criteria for use in evaluating the qualifications of testing or inspection agencies, or both, for road and paving materials. The criteria may be supplemented by more specific ... -
Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
Abstract: This practice covers procedures for obtaining data on the quality of solid electrical insulating materials and for judging whether the materials meet the requirements specified. This practice, however, is not intended to ... -
Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
Abstract: 5.1 This test method is designed to produce tensile property data for material specifications, research and development, quality assurance, and structural design and analysis. Factors that influence the tensile response ... -
Standard Specification for ASTM Reference Fluid for Coolant Tests
Abstract: 5.1 The data obtained for the reference test fluid are intended to be used by laboratory personnel to determine their capability to perform tests properly. If a particular determination does not fall within the prescribed ... -
Standard Test Method for Metal Glide Adhesion
Abstract: 3.1 This test method is used to determine the effect of plasticizers in tile on the floor polish itself. If the floor polish is softened by the plasticizers in the tile, it will become an adhesive and adhere to the metal ... -
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
Abstract: This specification covers machine-made fiberglass (glass-fiber-reinforced thermosetting-resin or glass-fiber-reinforced polymer mortar) pressure pipe intended for use in water conveyance systems. It is suited primarily for ... -
Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
Abstract: 5.1 This test method is used to obtain the resin flow of carbon fiber-epoxy prepreg tape, fabric or sheet material. It is suitable for comparing batches of material of supposedly the same characteristics and also for ... -
Standard Test Methods for Wood-Based Structural Panels in Compression
Abstract: 3.1 These methods determine the compressive strength of structural panels in response to stresses acting in the plane of the panel. 3.2 Method A—This method is applicable to structural panels of uniform properties within ... -
Standard Test Method for Water Resistance of Shipping Containers by Spray Method
Abstract: 4.1 This test method is used to determine the water resistance of shipping containers. It can be used to determine the ability of the container to resist deterioration caused by water or the ability of the container to ... -
Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
Abstract: 3.1 The growth of fungi and algae in and on the surface of paint films represents a major cause of discoloration or disfigurement of painted surfaces. 3.2 Simple observation of a coated object subjected to exterior exposure ... -
Standard Guide for Testing Coating Powders and Powder Coatings
Abstract: 4.1 This guide provides a useful summary to the selection and use of procedures for testing coating powders and powder coatings. It is applicable to both thermoplastic and thermoset coatings, unless indicated otherwise. ... -
Standard Specification for Mineral Insulating Liquid Used in Electrical Apparatus
Abstract: This specification covers two types of new mineral insulating oils of petroleum origin for use as an insulating and cooling medium in new and existing power and distribution electrical apparatuses, such as transformers, ... -
Standard Specification for Rubber Contraceptives (Male Condoms)
Abstract: This specification covers the minimum requirements for individually packaged male condoms made from natural rubber latex and intended for single use. This specification does not cover the following: (1) specifications for ... -
Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
Abstract: 3.1 This practice is issued to provide information useful in establishing sampling procedures. It is expected that this information will only be utilized in conjunction with an existing health and safety program and ... -
Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques
Abstract: 5.1 These test methods are useful in research and quality control for evaluating insulating materials and systems since they provide for the measurement of charge transfer and energy loss due to partial discharges (4-6). ...