درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 3521-3540 of 39933
-
Standard Guide for Collecting Skimmer Performance Data in Ice Conditions
Abstract: 4.1 This guide establishes test conditions that will provide a measured oil recovery rate and efficiency for a skimmer operating in drift ice. 4.2 End users need a procedure to quantify optimum performance data for planning ... -
Standard Guide for Use of Herding Agents in Conjunction with In-Situ Burning
Abstract: 4.1 This guide describes the use of herding agents for the purpose of in-situ burning. It is intended to aid decision-makers and spill-responders in contingency planning, spill response, and training, and to aid manufacturers ... -
Standard Guide for Hot Isostatic Pressing (HIP) of Aluminum Alloy Castings
Abstract: 4.1 HIP of castings should be performed in the as cast condition. Post HIP inspection of castings should result in a reduction of porosity that is evident in x-ray grade and properties. 4.2 HIP will not eliminate inclusions ... -
Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
Abstract: 3.1 This practice provides guidance for reporting, displaying, and plotting electrochemical corrosion data and includes recommendations on signs and conventions. Use of this practice will result in the reporting of ... -
Standard Practice for Proper Use of Mechanical Trenchless Point Repair Sleeve with Locking Gear Mechanism for Pipes of Varying Inner Diameter and Offset Joints
Abstract: 4.1 This practice is for use by design engineers, specifiers, regulatory agencies, owners, installers, and inspection organizations who are involved in the rehabilitation of pipes through the use of a Mechanical Trenchless ... -
Standard Specification for HEPA Filtration System Performance of Residential and Commercial Vacuum Cleaners
Abstract: This specification defines the minimum filtration efficiency requirements for achieving HEPA performance for filtration systems of residential and commercial vacuum cleaners. Only residential and commercial vacuum cleaning ... -
Standard Terminology Relating to Optical Fiber Sensing Systems
Abstract: 3.1 Definitions in this standard are to be regarded as correct for the terms found in other ASTM standards of Committee F36. Certain terms may be found in more than one standard issued under the jurisdiction of this committee ... -
Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings
Abstract: 4.1 Moisture permeating from concrete substrates can detrimentally affect the performance of resilient floor covering systems. All resilient flooring and adhesive manufacturers have a maximum acceptable level of moisture ... -
Standard Specification for Commercial Coffee Brewers
Abstract: This specification covers commercial single cup or batch coffee brewers which are used for brewing coffee in commercial and institutional facilities and does not include residential units. This specification is limited to ... -
Standard Guide for Identification of Shelf-Life Test Attributes for Endovascular Devices
Abstract: 3.1 The purpose of this guide is to provide a procedure for determining the appropriate attributes to evaluate in a shelf-life study for an endovascular device. -
Standard Guide for Hazard Awareness for Search and Rescue Personnel
Abstract: 4.1 This guide establishes the minimum level of training required to provide awareness-level knowledge for personnel operating in and around the areas and operations listed in 1.1. 4.2 This guide may be used by individuals ... -
Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
Abstract: This specification covers a Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride), (CPVC AL CPVC), composite pressure tubing with a welded aluminum tube reinforcement between the inner and outer layers. ... -
Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
Abstract: This specification covers four zinc alloys in ingot form, namely: Spin Casting Alloy SC-A, Spin Casting Alloy SC-B, Spin Casting Alloy SC-C, and ZA-73, for remelting for the manufacture of spin castings. The alloys may be ... -
Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems
Abstract: 5.1 This practice is for use by designers and specifiers, regulatory agencies, owners, contractors, and inspection organizations who are involved in rehabilitation of pressurized piping systems. -
Standard Specification for Fixed Anchorages Installed on Structures Used for Rope Rescue Training
Abstract: This specification specifies the minimum strength requirements for anchorages permanently installed or attached to training towers or other structures used for rope rescue training. It specifies the design loads that must ... -
Standard Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom
Abstract: 4.1 This guide describes a method of determining the buoyancy to weight ratio of spill response booms. The principle is based on Archimedes Law, which states that a body either wholly or partially immersed in a fluid will ... -
Standard Guide for Selection of Booms for Oil-Spill Response
Abstract: 3.1 This guide is intended to aid in the selection of oil spill containment boom for various response conditions. It is not intended to define rigid sets of boom selection standards. 3.2 This guide is intended to be used ...