Show simple item record

Washer-disinfectors - Part 2: Requirements and tests for washerdisinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. - First Edition

contributor authorCSA - CSA Group
date accessioned2017-09-04T17:43:27Z
date available2017-09-04T17:43:27Z
date copyright2009.03.01
date issued2009
identifier otherEDKPBFAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/166469
description abstractThis part of ISO 15883 specifies particular requirements for washer-disinfectors (WD) that are intended for use for the cleaning and thermal disinfection, in a single operating cycle, of re-usable medical devices such as surgical instruments, anaesthetic equipment, bowls, dishes and receivers, utensils and glassware.
NOTE 1 Thermal disinfection can be achieved by rinsing the load with hot water, exposure to steam or combination of the two.
The requirements specified in this part of ISO 15883 are applicable in conjunction with the general requirements specified in ISO 15883-1.
The specified performance requirements of this part of ISO 15883 may not ensure the inactivation or removal of the causative agent(s) (prion protein) of transmissible spongiform encephalopathies.
NOTE 2 If it is considered that prion protein can be present, particular care is needed in the choice of disinfectants and cleaning agents to ensure that the chemicals used do not react with the prion protein in a manner that may inhibit its removal or inactivation.
languageEnglish
titleCSA CAN/CSA-Z15883-2-09num
titleWasher-disinfectors - Part 2: Requirements and tests for washerdisinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. - First Editionen
typestandard
page30
statusActive
treeCSA - CSA Group:;2009
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record