درباره ما
Browsing ASSE - ASSE/SAFE - American Society of Safety Engineers by Issue Date
Now showing items 1-20 of 75
-
ASSE Z590.2
Abstract: This standard establishes the scope and functions of the professional safety position.
Purpose: The purpose of this standard is to define the scope and functions of the professional safety position. -
ASSE A10.10
Abstract: This standard provides minimum safety requirements for the selection, installation, operation and maintenance of space heating devices and equipment of temporary and portable design. It covers the heater unit and its ... -
ASSE A10.6
Abstract: This standard applies to the demolition of buildings and other structures. This standard is intended to be complete in itself, except that any device, equipment and activity incidental to demolition operations shall be ... -
ASSE A10.3
Abstract: This standard provides safety requirements for powder-actuated fastening tools that propel studs, pins, fasteners, or other objects for the purpose of affixing it, by penetration, to hard structural material (such as ... -
ASSE A10.44
Abstract: This standard establishes the minimum requirements for the control to prevent release of energy sources that could cause injury or illness to personnel performing construction and demolition work.
This standard does ... -
ASSE Z9.1
Abstract: This standard establishes minimum control requirements and ventilation system design criteria for controlling and removing air contaminants to protect the health of personnel engaged in open-surface tank operations. It is ... -
ASSE A10.31
Abstract: Equipment Covered. This standard applies to special multipurpose vehicle-mounted machines, commonly known as digger derricks. These machines are primarily designed to accommodate components that dig holes, ... -
ASSE A10.24
Abstract: This standard establishes safe operating practices for the installation, maintenance and removal of membrane roofing that is seamed or seamless on lowsloped roofs with a maximum slope of four and twelve. These types of ... -
ASSE Z88.6
Abstract: This standard provides information that is useful for the medical evaluation of respirator users. This standard does not deal with medical surveillance or biological exposure monitoring. It is understood that local ... -
ASSE A10.5
Abstract: This standard applies to material hoists used to raise or lower materials during construction, alteration or demolition. It is not applicable to the temporary use of permanently installed personnel elevators as material ... -
ASSE A10.4
Abstract: This standard applies to the design, construction, installation, operation, inspection, testing, maintenance, alterations and repair of hoists and elevators that (1) are not an integral part of buildings, (2) are installed ... -
ASSE Z9.7
Abstract: This standard established minimum criteria for the design and operation of a recirculating industrial process exhaust ventilation system used for contaminant control.
Purpose
The purpose of this ... -
ASSE Z359.2
Abstract: This standard establishes guidelines and requirements for an employer's managed fall protection program, including policies, duties and training; fall protection procedures; eliminating and controlling fall hazards; rescue ... -
ASSE Z359.1
Abstract: This standard establishes requirements for the performance, design, marking, qualification, instruction, training, inspection, use, maintenance, and removal from service of connectors, full body harnesses, lanyards, energy ... -
ASSE Z359.3
Abstract: This standard establishes requirements for the performance, design, marking, qualification, test methods, and instructions of lanyards and harnesses comprising personal positioning and travel restraint systems for authorized ... -
ASSE TR A1264.3
Abstract: Purpose and Scope
This technical report discusses the technical aspects, research, legislation, standards activities, and operation of the widely-used Variable Angle Tribometers (VATs) commercially available ... -
ASSE A1264.1
Abstract: This standard sets forth safety requirements in industrial and workplace situations for protecting persons in areas/places where danger exists of persons or objects falling through floor, roof or wall openings, or from ... -
ASSE Z9.6
Abstract: The requirements and emission and exposure control principles described in this standard represent the minimum criteria intended 1) to protect the health of personnel engaged in and working in the vicinity of grinding, ...