ASHRAE OR-16-C074

Using Building's Thermal Mass as Short Term Integrated Energy Storage

contributor author	ASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
date accessioned	2017-09-04T17:57:52Z
date available	2017-09-04T17:57:52Z
date copyright	2016.01.01
date issued	2016
identifier other	FPXPOFAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/180944
description abstract	Building integrated thermal energy storage (BITES) systems specifically ventilated concrete slabs (VCS) has been discussed in this article. Additionally, a simplified three dimensional model of the VCS was developed in SolidWorks Flow Simulation software. The model was used to better understand the charging and discharging process of the VCS as a thermal energy storage. It was tested for multiple charging and discharging scenarios such as being connected to the building integrated photovoltaic and thermal (BIPV/T) system or using an air source heat pump (ASHP) as the heat source. Preliminary results show VCS is able to store up to 30% of the generated energy by BIPV/T and charging process is even more effective with an ASHP. Moreover, it was shown a properly charged VCS would warm up the cold outdoor air by approximately 5°C (9°F) to be used as an inlet for the heat pump.
language	English
title	ASHRAE OR-16-C074	num
title	Using Building's Thermal Mass as Short Term Integrated Energy Storage	en
type	standard
page	8
status	Active
tree	ASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.:;2016
contenttype	fulltext