درباره ما
ASME - ASME International: Recent submissions
Now showing items 1021-1040 of 1083
-
ASME NQA-1
Abstract: PURPOSE
This Part sets forth requirements for the establishment and execution of quality assurance programs during siting, design, construction, operation, and decommissioning of nuclear facilities. ... -
ASME B107.500
Abstract: FOREWORD
The American National Standards Committee B107 on Socket Wrenches and Drives was originally under the sponsorship of The American Society of Mechanical Engineers (ASME). It was subsequently ... -
ASME B30.17
Abstract: Volume B30.17 includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of hand-operated and power-operated overhead cranes and monorail systems with an underhung ... -
ASME B30.9
Abstract: FOREWORD
This American National Standard, Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings, has been developed under the procedures accredited by the American National ... -
ASME A112.19.19
Abstract: This Standard establishes requirements and test methods pertaining to materials, significant dimensions, and functional performance for vitreous china nonwater urinals. The sanitary performance requirements and test ... -
ASME B18.2.2
Abstract: This Standard is intended to cover the complete general and dimensional data for the various types of inch series square and hex nuts, including machine screw nuts and coupling nuts, recognized as American National Standard. ... -
ASME B30.26 INTERPRETATIONS
Abstract: FOREWORD
This publication includes all of the written replies issued between the indicated dates by the Secretary, speaking for the ASME B30 Standards Committee, Safety Standard for Cableways, Cranes, ... -
ASME STP-NU-067
Abstract: VISION STATEMENT AND OVERVIEW
The ASME Board on Nuclear Codes and Standards approved an effort to develop rules for the construction of fusion-energy-related components such as the vacuum vessel (vacuum ... -
ASME B5.11
Abstract: SCOPE AND PURPOSE
This standard is to provide the means for in. dividual axial adjustment of drilling, reaming, and tapping tools, etc. in the spindles of single or multiple spindle heads.
Further, its purpose is ... -
ASME MFC-22
Abstract: This Standard describes the criteria for the application of a turbine flowmeter with a rotating blade for the measurement of liquid flows through closed conduit running full. The standard discusses the following: ... -
ASME N626.3
Abstract: This Standard presents minimum requirements for the qualification of personnel engaged in the certification and Design Report review activities of the ASME Code. The personnel addressed are those who perform the following ... -
ASME STP-NU-015
Abstract: This document provides information and guidance regarding applicable U.S. industry and government documents and standards to users specifying requirements for overhead and gantry cranes for nuclear facilities. This includes ... -
ASME OM
Abstract: GENERAL
In 2008, the OM Committee directed that the two separately published OM Code and the OM Standards and Guides (OM-S/G) publications be combined into one document. This was done to ensure all of ... -
ASME QFO-1
Abstract: This Standard specifies the requirements leading to certification as a fossil combustion operator of a high capacity fossil fuel fired plant as appropriate to the Clean Air Act as amended in 1990, for a fossil fuel fired ... -
ASME STP-NU-061
Abstract: PURPOSE AND SCOPE
A number of concerns were voiced in the USA, Europe and Asia concerning how the NSQ-100 document was to be used by construction and engineering companies, regulators, standard developing ... -
ASME A112.6.7
Abstract: This Standard applies to sanitary floor sinks and includes requirements for material, construction, inspection, testing, and marking. The provisions of this Standard are not intended to prevent the use of any alternate ... -
ASME N510
Abstract: This Standard covers in-service testing of ASME N509 high-efficiency air treatment systems for nuclear power plants.
Use of This Standard
This Standard provides a basis for the development of test ... -
ASME B94.33
Abstract: This Standard covers the American National Standard practice for sizes, types, tolerances, and identification of jig bushings and locking devices used for securing the bushings in the jig or bushing plate. -
ASME A112.4.1
Abstract: This Standard establishes performance requirements and test methods applicable to water heater relief valve drain (or runoff) tubes for use with relief valves having a steam rating of 105,000 Btu/hr or less. -
ASME B89.1.17 ERTA
Abstract: This Standard is intended to establish uniform practices for the measurement of thread measuring wires. The standard includes methods for the direct measurement of both master and working wires, and methods for the comparison ...