درباره ما
ASME - ASME International: Recent submissions
Now showing items 841-860 of 1083
-
ASME RA-SB
Abstract: SCOPE AND APPLICABILITY
This Standard establishes requirements for a Level 1 PRA of internal and external hazards for all plant operating modes (low power and shutdown modes will be included at a future ... -
ASME B30.4 INTERPRETATIONS
Abstract: Scope:
This publication includes all of the written replies issued between the indicated dates by the Secretary, speaking for the ASME B30 Committee, Safety Standard for Cableways, ... -
ASME STP-PT-046
Abstract: The goals of this report are I) to examine prior studies that have been conducted to define the relationship of block valves on gas transmission pipelines to public safety, 2) to assess the relationshjp of valve spacing ... -
ASME A17.5
Abstract: The requirements of this Standard apply to the following electrical equipment for elevators, escalators, moving walks, dumbwaiters, material lifts, and elevating devices for persons with physical disabilities (platform ... -
ASME A112.19.6
Abstract: This Standard establishes sanitary performance requirements and test procedures for water closets and urinals discharging into gravity waste systems in permanent buildings and structures. -
ASME A112.19.17
Abstract: This Standard establishes general requirements, dimensions and tolerances, materials, installation instructions, testing requirements, and markings and identification for SVRS devices. SVRS devices are intended to be ... -
ASME B89.3.4
Abstract: This Standard is primarily intended for, but not limited to, the standardization of methods for specifying and testing axes of rotation of spindles used in machine tools and measuring machines. Appendices provide advisory ... -
ASME PTC 25
Abstract: (a) This Code provides instructions in Part II for flow capacity testing and in Part III for in-service and bench testing. Testing of reclosing and nonreclosing pressure relief devices is conducted under various ... -
ASME B30.26
Abstract: Volume B30.26 includes provisions that apply to the construction, installation, operation, inspection, and maintenance of detachable rigging hardware used for load handling activities in conjunction with equipment described ... -
ASME B89 TECH REPT
Abstract: This report deals with coordinate measuring machines having three linear axes perpendicular to each other. Such machines have three movable components. An example is the moving-bridge machine, Fig. 1. The movable ... -
ASME PCC-2
Abstract: This Standard provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards1 after they have been placed in service. These repair methods include relevant ... -
ASME PTC 12.4
Abstract: Requirements are specified by this Code for application on MSR testing in the following areas:
(a) Pretest arrangements and agreements;
(b) Instrumentation types and accuracies;
(c) ... -
ASME STP-PT-024
Abstract: This report provides recommendations for design rules for very short term loads for which creep should not be a design consideration, termed Occasional Loads herein, and rules for loads for which creep is a design ... -
ASME A112.6.4
Abstract: This Standard establishes minimum design requirements for roof drains, including general purpose, gutter and cornice, parapet and promenade, balcony, or deck types, which convey rainwater from the roof area of building ... -
ASME B18.2.3.3M
Abstract: This Standard covers the complete general and dimensional data for metric heavy hex screws recognized as American National Standard.
The inclusion of dimensional data in this Standard is not intended to imply that all ... -
ASME B30.12
Abstract: SCOPE EXCLUSIONS
Any exclusion of, or limitations applicable to the equipment, requirements, recommendations or operations contained in this Standard are established in the affected volume's scope. ...