UL - UL: Recent submissions
Now showing items 1461-1480 of 6633
-
UL 854
Abstract: These requirements cover Type USE and USE-2 (below-ground) and Type SE (above-ground) power cables for installation in accordance with Article 338 and other applicable parts of the National Electrical Code (NEC). These ... -
UL 248-5
Abstract: This Part applies to Class G fuses rated 20 A or less, 600 V ac; 21 – 60 A, 480 V ac. DC ratings are optional. -
UL 935 BULLETIN
Abstract: These requirements cover ballasts of the resistance, reactance, and electronic (high frequency) types for use with fluorescent lamps involving a potential of 2500 volts or less in accordance with the National Electrical ... -
UL 103 BULLETIN
Abstract: These requirements cover factory-built chimneys intended for venting gas, liquid, and solid-fuel fired residential-type appliances and building heating appliances in which the maximum continuous flue-gas outlet temperatures ... -
UL SUBJECT 1836
Abstract: These requirements cover electric motors and generators for permanent installation and use in hazardous (classified) locations, Class I, Division 2, Groups A, B, C, and D, and Class II, Division 2, Groups F and G, in ... -
UL SUBJECT 3456
Abstract: These requirements cover electric-battery-powered carts designed for a single user for indoor commercial use with respect to a risk of fire, electric shock, and personal injury.
These requirements cover electric-batt ... -
UL 310
Abstract: These requirements apply to 0.110-, 0.125-, 0.187-, 0.205-, and 0.250-inch (2.8-, 3.2-, 4.8-, 5.2-, and 6.3-mm) wide electrical quick-connect wiring terminations, both connectors and tabs, for use in electrical equipment ... -
UL 1562
Abstract: These requirements cover single-phase or three-phase, dry-type, distribution transformers, including solid cast and resin encapsulated transformers. The transformers are provided with either ventilated or non-ventilated ... -
UL SUBJECT 508I
Abstract: This outline of investigation covers open and enclosed manual and electromechanical disconnect switches intended for disconnecting the output of DC photovoltaic (PV) panels.
Manual disconnect switches are intended for ...

درباره ما