HH-G-156E

GASKET MATERIAL, GENERAL PURPOSE; RUBBER SHEETS, STRIPS, AND SPECIAL SHAPES

contributor author	NAVY - SH - Naval Sea Systems Command (Ship Systems)
date accessioned	2017-09-04T15:19:03Z
date available	2017-09-04T15:19:03Z
date copyright	04/05/1993
date issued	1993
identifier other	MSDXDAAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/18793
description abstract	This specification covers material for general purpose rubber gaskets and packings except those for shipboard hatches, airports, watertight and airtight doors. Gaskets covered by this specification shall be of the following types, as specified (see 6.2): Type I - Soft (nominally 40 Shore A durometer). Type II - Medium (nominally 55 Shore A durometer). Type III - Hard (nominally 80 Shore A durometer). Intended Use: The material is intended for use for general purpose rubber gaskets and packings except those for shipboard hatches, airports, watertight and airtight doors.
language	English
title	HH-G-156E	num
title	GASKET MATERIAL, GENERAL PURPOSE; RUBBER SHEETS, STRIPS, AND SPECIAL SHAPES	en
type	standard
page	15
status	Active
tree	NAVY - SH - Naval Sea Systems Command (Ship Systems):;1993
contenttype	fulltext
subject keywords	Compression set
subject keywords	Tensile strength
subject keywords	Water extruction