درباره ما
SMD-5962-96895
MICROCIRCUIT, DIGITAL, BICMOS, HIGH-SPEED OPTICAL/COPPER TRANSMITTER INTERFACE, MONOLITHIC SILICON
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T18:06:55Z | |
| date available | 2017-09-04T18:06:55Z | |
| date copyright | 05/06/1997 | |
| date issued | 1997 | |
| identifier other | GNQAEAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/189865 | |
| description abstract | This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. The PIN is as shown in the following example: Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 7B923 High-speed optical/copper transmitter interface The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style 3 CQCC2-N28 28 Square leadless chip carrier The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Supply voltage range (VCC) to ground potential continuous ------------------------ −0.5 V to +7.0 V DC voltage range applied to output ---------------------- −0.5 V to VCC maximum DC input voltage range ---------------------------------- −0.5 V to +7.0 V DC output current (TTL LOW) ----------------------------- 30 mA DC output current (PECL HIGH) --------------------------- −50 mA DC input current ---------------------------------------- −30 to +0.5 mA Storage temperature range ------------------------------- −65°C to +150°C Maximum power dissipation (PD) 2/ ----------------------- 1.0 W Lead temperature (soldering, 10 seconds) ---------------- 260°C Thermal resistance, Junction to case (θJC) -------------- See MIL-STD-1835 Junction temperature (TJ) ------------------------------- 155°C Supply voltage range (VCC) ------------------------------ +4.5 V dc to +5.5 V dc Minimum high-level input voltage (VIH) (CKW and FOTO) -------------------------------------- 2.2 V (Others) -------------------------------------------- 2.0 V Maximum low-level input voltage (VIL) ------------------- 0.8 V Case operating temperature range ------------------------ −55°C to + 125°C Fault coverage measurement of manufacturing logic tests (MIL-STD-883, test method 5012) -------------- XX percent 3/ Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices. | |
| language | English | |
| title | SMD-5962-96895 | num |
| title | MICROCIRCUIT, DIGITAL, BICMOS, HIGH-SPEED OPTICAL/COPPER TRANSMITTER INTERFACE, MONOLITHIC SILICON | en |
| type | standard | |
| page | 24 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;1997 | |
| contenttype | fulltext |
