Show simple item record

MICROCIRCUITS, EXTENDED DUAL CHANNEL DIRECT MEMORY ACCESS CONTROLLER, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T18:13:45Z
date available2017-09-04T18:13:45Z
date copyright02/26/1991
date issued1991
identifier otherHFSVDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/196671
description abstractThis drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices".
The complete PIN shall be as shown in the following example: CHART
The device type(s) shall identify the circuit function as follows:
         Device type        Generic number                      Circuit function               01                 68442-8         Extended dual channel direct memory access controller


The case outline(s) shall be as designated in appendix C of MIL-M-38510 and as follows:
           Outline Letter                               Case outline                  X               68-pin (1.07" × 1.07" × 0.102"), pin grid array (see figure 1)                 Y               68-pin (0.96" × 0.96" × 0.125"), ceramic chip, leaded chip carrier                                   package (see figure 2)


       Supply voltage range with respect to GND (VCC) - - - - -   −0.3 V dc to +7.0 V dc        Storage temperature range  - - - - - - - - - - - - - - -   −65°C to +150°C        Maximum power dissipation  - - - - - - - - - - - - - - -   1.75 W        Maximum operating temperature (TC) - - - - - - - - - - -   −55°C to +110°C        Lead temperature (soldering, 5 seconds)  - - - - - - - -   +270°C        Junction temperature (TJ)  - - - - - - - - - - - - - - -   +150°C        Thermal resistance, junction-to-case (θJC):          Cases X and Y  - - - - - - - - - - - - - - - - - - - -   10°C/W        Input capacitance (CIN)  - - - - - - - - - - - - - - - -   13 pF


       Supply voltage (VCC) - - - - - - - - - - - - - - - - - -   4.5 V dc to 5.5 V dc        High level input voltage (VIH) - - - - - - - - - - - - -   2.0 V dc to VCC        Low level input voltage (VIL)  - - - - - - - - - - - - -   GND −0.3 V to 0.8 V        Minimum high level output voltage (VOH)  - - - - - - - -   2.4 V dc        Maximum low level output voltage (VOL) - - - - - - - - -   0.4 V dc        Frequency of operation:          Device type 01 - - - - - - - - - - - - - - - - - - - -   2.0 to 8.0 MHz        Case operating temperature (TC)- - - - - - - - - - - - -   −55°C to +110°C


Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do no exist and qualified military devices that will perform the required function are not available for OEM application. When military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
languageEnglish
titleSMD-5962-86811num
titleMICROCIRCUITS, EXTENDED DUAL CHANNEL DIRECT MEMORY ACCESS CONTROLLER, MONOLITHIC SILICONen
typestandard
page33
statusActive
treeDLA - CC - DLA Land and Maritime:;1991
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record