Show simple item record

UL Standard for Safety Air Filter Units - COMMENTS DUE: AUGUST 22, 2011

contributor authorUL - UL
date accessioned2017-09-04T18:19:35Z
date available2017-09-04T18:19:35Z
date copyright07/19/2011
date issued2011
identifier otherHUHTMEAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/202243
description abstractThese requirements cover tests to determine combustibility and the amount of smoke generated for air filter units of both washable and throwaway types used for removal of dust and other airborne particles from air circulated mechanically in equipment and systems installed in accordance with the Standards for Installation of Air Conditioning and Ventilating Systems, NFPA 90A (Other Than Residence Type), and for Installation of Warm Air Heating and Air Conditioning Systems, NFPA 90B (Residence Type).
Since the combustibility and smoke generation of an air filter unit, after a period of service, depends upon the nature and quantity of the material collected by the filter, the test requirements of this standard, for classification purposes, apply only to air filter units in a clean condition. Consequently, when filters are susceptible to the accumulation of combustible deposits, it is intended that maintenance and inspection practices should be followed as proposed in Appendix B of NFPA 90A.
languageEnglish
titleUL 900 BULLETINnum
titleUL Standard for Safety Air Filter Units - COMMENTS DUE: AUGUST 22, 2011en
typestandard
page2
statusActive
treeUL - UL:;2011
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record