MIL-PRF-87961A

Abstract

This specification covers the requirements for hose and hose assemblies (see <a>6.9</a>) which supply breathing oxygen to aircrews during the operation of high performance aircraft. <br>Hoses and hose assemblies covered by this specification are of the following types with lengths as identified in figures 1, 4, and 5 (see <a>6.2</a> and <a>6.10</a>). </span><pre>Type I Hose with end covers and outer covering Type II Type I hose with MS22058-1 connector and MS22064-5 clamp Type III Type I hose with MS22058-2 connector, MS22064-5 clamp and retainer strap, P/N 7225317-10</pre> <br> <strong>Beneficial comments (recommendations, additions, deletions) and any pertinent data that may be of use in improving this document should be addressed to: Oklahoma City Air Logistics Center/TICLA, 3001 Staff Drive, Suite 1AE1 - 101A, Tinker AFB, OK 73145-3036, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.</strong> <br><b><u>Intended Use:</u></b> The hose assembly covered by this specification is for supplying breathing oxygen to aircrew members during the operation of aircraft. The hose assembly extends from the oxygen breathing regulator to the application connector. These hose assemblies are part of the Aircraft Life Support System. <br>