MIL-DTL-17505F

HOSE AND HOSE ASSEMBLY, RUBBER, OIL AND GASOLINE, SUCTION AND DISCHARGE

contributor author	NAVY - YD - Naval Facilities Engineering Command
date accessioned	2017-09-04T18:40:37Z
date available	2017-09-04T18:40:37Z
date copyright	35741
date issued	1997
identifier other	JVDBEAAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/222219
description abstract	This specification covers smooth-bore hose and hose assemblies for suction and discharge service in the transfer of fuels, such as Navy special fuel oil, diesel fuel, oil, jet fuel (JP-5 or JP-8), motor gasoline, and aviation gasoline. The hose is intended to handle petroleum products having an aromatic content no greater than 30 percent. The maximum working pressure of this hose is 150 pound-force per square inch (psi) (1 034 kilopascal (kPa)). Hose covered by this specification shall be of one type, having a 4-, 6-, 8-, or 12-inch (102, 152, 203, or 305 millimetre (mm)) inside diameter (id), as specified (see 6.2). Intended Use: Hose and hose assembly are intended for use in the transfer of oil and gasoline from anchored tankers and barges to shore stations capable of handling discharge pressures up to 150 psi (1 034 kilopascal (kPa)).
language	English
title	MIL-DTL-17505F	num
title	HOSE AND HOSE ASSEMBLY, RUBBER, OIL AND GASOLINE, SUCTION AND DISCHARGE	en
type	standard
page	16
status	Active
tree	NAVY - YD - Naval Facilities Engineering Command:;1997
contenttype	fulltext
subject keywords	Fuels
subject keywords	Petroleum transfer