Show simple item record

English -- Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysis;
German -- Mineraloelerzeugnisse - Bestimmung des Gehaltes an Benzo(a)pyren (BaP) und ausgewaehlten polycyclischen Kohlenwasserstoffen (PAKs) in Extenderoelen - Verfahren mittels doppelter LC-Vorreinigung und GC/MS-Analyse

contributor authorDIN - Deutsches Institut für Normung e. V.
date accessioned2017-09-04T18:47:12Z
date available2017-09-04T18:47:12Z
date copyright2013.05.01
date issued2013
identifier otherKLMCDFAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/228411
description abstractThis European Standard specifies a procedure for the determination of the content of benzo[a]pyrene (BaP) in extender oils which are commonly used in the rubber industry for the production of tyres or parts of tyres. The method also yields the sum of the eight individual polycyclic aromatic hydrocarbons (PAHs) listed.
The procedure has been tested and verified for the PAHs listed in Table 1 (those required by the European Commission [1]) and additional PAHs as listed.
Analysis of other PAHs is possible in principle, but sufficient quality assurance performed by the user is necessary to secure the analysis.
The application range for this method is from approximately 4 mg/kg to approximately 15 mg/kg for the eight individual PAHs and from approximately 0,5 mg/kg to approximately 2 mg/kg for BaP.
NOTE 1 The intended working range for this method is in the 0,1 mg/kg to 15 mg/kg range. For the lower levels precision has not yet been established.
NOTE 2 For the purposes of this European Standard, the term "% (m/m)" is used to represent the mass fraction (ω).
languageEnglish
titleDIN EN 16143num
titleEnglish -- Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysisen
titleGerman -- Mineraloelerzeugnisse - Bestimmung des Gehaltes an Benzo(a)pyren (BaP) und ausgewaehlten polycyclischen Kohlenwasserstoffen (PAKs) in Extenderoelen - Verfahren mittels doppelter LC-Vorreinigung und GC/MS-Analyseother
typestandard
page24
statusActive
treeDIN - Deutsches Institut für Normung e. V.:;2013
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record