Show simple item record

English -- Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track;
German -- Bahnanwendungen - Oberbau - Abnahme von Arbeiten - Teil 3: Abnahme von reprofilierten Schienen im Gleis

contributor authorDIN - Deutsches Institut für Normung e. V.
date accessioned2017-09-04T18:47:34Z
date available2017-09-04T18:47:34Z
date copyright2012.04.01
date issued2012
identifier otherKMHDVEAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/228731
description abstractThis European Standard specifies the technical requirements and the measurements to be made for the acceptance of work to reprofile longitudinally and/or transversely the heads of railway rails. For acceptance purposes, two classes of longitudinal profile and three classes of transverse profile tolerance are defined.
Annexes describe procedures to verify reference instruments to be used for these measurements as well as methods to approve non-reference instruments to be used for measurements.
This European Standard applies to reprofiled vignole railway rails 46 kg/m and above.
It does not apply for acoustic rail reprofiling.
A form of acceptance documentation that may be used is given in Annex E.
languageEnglish
titleDIN EN 13231-3num
titleEnglish -- Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in tracken
titleGerman -- Bahnanwendungen - Oberbau - Abnahme von Arbeiten - Teil 3: Abnahme von reprofilierten Schienen im Gleisother
typestandard
page41
statusActive
treeDIN - Deutsches Institut für Normung e. V.:;2012
contenttypefulltext
subject keywordsBahnanwendung
subject keywordsGleis
subject keywordsInspection
subject keywordsInspektion
subject keywordsOberbau
subject keywordsPermanent ways
subject keywordsRailway applications
subject keywordsTracks (materials handling equipment)


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record