Show simple item record

High-voltage switchgear and controlgear – Part 37-013: Alternating-current generator circuit-breakers

contributor authorIEEE - The Institute of Electrical and Electronics Engineers, Inc.
date accessioned2017-09-04T18:48:45Z
date available2017-09-04T18:48:45Z
date copyright2015.10.01
date issued2015
identifier otherKPSQMFAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/230029
description abstractThis part of IEC 62271 is applicable to three-phase a.c. high-voltage generator circuitbreakers, hereafter called generator circuit-breaker, designed for indoor or outdoor installation and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 kV and up to 38 kV.
It is applicable to generator circuit-breakers that are installed between the generator and the transformer terminals. Requirements relative to generator circuit-breakers intended for use with generators and transformers rated 10 MVA or more are covered specifically. Generator circuits rated less than 10 MVA and pumped storage installations are considered special applications, and their requirements are not completely covered by this standard.
This standard is also applicable to the operating mechanisms of generator circuit-breakers and to their auxiliary equipment.
languageEnglish
titleIEEE 62271-37-013num
titleHigh-voltage switchgear and controlgear – Part 37-013: Alternating-current generator circuit-breakersen
typestandard
page226
statusActive
treeIEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record