MIL-STD-1399 -102A

Abstract

This section is an integral part of MIL-STD-1399. When the interface between the ships low pressure dry air support system and user equipment is under consideration this section and the standard shall be viewed as a single document. The policies and procedures established by MIL-STD-1399 are mandatory. <br>This section establishes interface requirements for shipboard equipment utilizing low pressure dry air support systems to ensure compatability between such equipment and the ships dry air support systems. <br>The interface which is the concern of this section is shown symbolically on <a href="#AUZPDAAAAAAAAAAA-X7">figure 1</a> (see definitions of MIL-STD-1399): <a name="AUZPDAAAAAAAAAAA-X7" id="AUZPDAAAAAAAAAAA-X7"><img alt="FIGURE 1. Interface." /></a> <br>This section was developed primarily for use in establishing interface requirements for shipboard electronic equipment requiring a continuous source of high quality (nonconductive) gas under pressure such as antenna waveguides, however, this section is also applicable to low pressure equipment requiring compressed air of greater purity than is available from the ship service low pressure air system specified in MIL-STD-1399, section 106.