درباره ما
AIR FORCE - 02 - Air Force Network Integration Center (AFNIC): Recent submissions
Now showing items 21-40 of 67
-
MIL-PRF-38311C
Abstract: This specification covers requirements for the preparation of operation manuals and associated checklists for Intercontinental Ballistic Missiles (ICBMs).
Two types of operation manuals and associated checklists are ...Subject(s) : Checklists , Illustrations , Intercontinental Ballistic Missiles , Operation Manuals , -
MIL-HDBK-340A VOL I
Abstract: This handbook provides guidance for establishing uniform procedures for the control, determination, and documentation of product verification test requirements for launch, upper-stage, and space vehicles. -
DOD-HDBK-343
Abstract: PURPOSE This handbook provides definitions of various classes of space programs and of various classes of space equipment. The handbook also provides detailed technical requirements for the design, construction. and ... -
MIL-HDBK-1547A
Abstract: This Handbook was developed to aid Designers and Parts, Materials, and Processes (PMP) specialists with the design, development, and fabrication of electronic systems required to have long life and/or high reliability while ...Subject(s) : applications , Baseline , Class S , control board , derating , electrical , electromagnetic , electromechanical , electronic , electro-optical , in-process controls , JAN Class S , JAN Class S , lot , lot , lot conformance tests , materials , MPCAG , operating stock , parts , parts , PMP , PMP baseline , PMPCB , PMPSL , processes , qualification , registered , selection list , space , space , -
MIL-HDBK-339
Abstract: This handbook presents requirements for the management, design, and manufacturing control of custom monolithic large scale integrated circuits intended for use in high reliability space systems. In addition, this handbook ... -
SMC-S-009
Abstract: Purpose
This document establishes the requirements (including those cited in the Appendices herein) for the preparation, implementation, and operation of a Parts, Materials, and Processes (PMP) control ... -
SMC-S-21
Abstract: This document describes the objective requirements for the conduct of Technical Reviews and Audits on such end items (EIs) as a system, equipment, distributed and embedded Software Configuration Item (SWCI), Hardware ... -
SMC-S-022
Abstract: According to the U.S. Government Orbital Debris Standard Practices, a spacecraft or upper stage with perigee altitude below 2000 km in its final mission orbit may be disposed of by using an atmospheric reentry option. The ... -
SMC-S-014
Abstract: Purpose
This document defines fundamental survivability program management requirements for the system acquisition life-cycle. As a management standard, this document requires that the contractor shall: ... -
MIL-STD-1545
Abstract: This standard establishes procedures under which the contractor will provide spare parts, inventory and maintenance services for space and missile systems. -
MIL-STD-1522A NOTICE 2
Abstract: This standard establishes requirements for the design and test of all pressurized systems for missiles, space vehicles and ground support equipment. These requirements, when implemented on a particular pressurized system, ... -
SMC-S-008
Abstract: Purpose
The purpose of this document is to minimize risk to space programs in the area of electromagnetic compatibility (EMC).
Application
Document Applicability ... -
SMC-S-020
Abstract: Purpose
These requirements set forth the general design and testing requirements for electrical wiring harnesses (see 6.1) and cable assemblies (see 6.2.4) that are to be installed in space vehicles. ... -
SMC-S-001
Abstract: Document Purpose
This standard defines the government's requirements for a disciplined systems engineering approach to system acquisitions. It specifies the government's requirements for executable ... -
SMC-S-023 VOL 1
Abstract: These style requirements are consistent with section 5.15 on user-computer interface in Military Standard (MIL-STD) 1472F and references other military standards providing direction with relevance to user interface design ...