Show simple item record

MICROCIRCUIT, DIGITAL, CMOS, CLOCK GENERATOR DRIVER, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T15:30:45Z
date available2017-09-04T15:30:45Z
date copyright01/11/1996
date issued1996
identifier otherOBPZDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/32203
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes Q and M) and space application (device class V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device class M RHA marked devices shall meet the MIL-I-38535 appendix A specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
      Device type               Generic number                   Circuit function             01                       82C84A/7               Latchup resistance CMOS                                                            clock generator driver


The device class designator shall be a single letter identifying the product assurance level as follows:
      Device class                              Device requirements documentation             M                      Vendor self-certification to the requirements for non-JAN class B                                   microcircuits in accordance with 1.2.1 of MIL-STD-883           Q or V                   Certification and qualification to MIL-I-38535


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
      Outline letter      Descriptive designator     Terminals        Package style              V                    CDIP2-T18               18        Dual-in-line package


The lead finish shall be as specified in MIL-STD-883 (see 3.1 herein) for class M or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
     Supply voltage (VCC) - - - - - - - - - - - - - - - - - - - - - -    +7.0 V dc      Input or output voltage range  - - - - - - - - - - - - - - - - -    VSS −0.3 V dc to VDD +0.3 V dc      Storage temperature range (TSTG) - - - - - - - - - - - - - - - -    −65°C to +150°C      Junction temperature (TJ)  - - - - - - - - - - - - - - - - - - -    +175°C      Maximum package power dissipation at TA = +125°C (Pd) 2/  - - - -   0.64 W      Thermal resistance, Junction-to-case (ΘJC) - - - - - - - - - - -    13°C/W      Thermal resistance, Junction-to-ambient (ΘJA)  - - - - - - - - -    78°C/W      Lead temperature (soldering, 10 seconds) - - - - - - - - - - - -    +300°C


     Operating supply voltage range (VCC)  - - - - - - - - - - - - - - - - - - - - -    4.5 V dc to +5.5 V dc      Operating temperature range (TA)  - - - - - - - - - - - - - - - - - - - - - - -    −55°C to +125°C      Input low voltage range, except RESET (VIL) - - - - - - - - - - - - - - - - - -    0 V dc to +0.8 V dc      Input high voltage range, except RESET (VIH)  - - - - - - - - - - - - - - - - -    2.2 V dc to VCC      Input low voltage range (VIL) RESET - - - - - - - - - - - - - - - - - - - - - -    0 V dc to +0.5 V dc      Input high voltage range, RESET (VIH) - - - - - - - - - - - - - - - - - - - - -    0.86 VCC to VCC


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-95715num
titleMICROCIRCUIT, DIGITAL, CMOS, CLOCK GENERATOR DRIVER, MONOLITHIC SILICONen
typestandard
page17
statusActive
treeDLA - CC - DLA Land and Maritime:;1996
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record