Show simple item record

ASTM F2336-17

contributor authorASTM - ASTM International
date accessioned2025-09-30T18:04:28Z
date available2025-09-30T18:04:28Z
date copyright2024
date issued2024
identifier otherf2336-17r24.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/342121
description abstractThis guide deals with the provisions for consistent safety considerations in the design and construction of new roller hockey rinks in order to reduce potential safety hazards. It is projected to standardize game conditions; establish guidelines that will provide a level of conformity for the purpose of competition and reduce potential hazards to players and game officials; and applies to the development of new arenas and to existing facilities that will be renovated. This guide takes into consideration that most ice hockey rinks with concrete surfaces can be acceptable for roller hockey. However, dasher boards must meet criteria respective of the specific activity. Facilities designed and constructed for roller hockey may not be acceptable for ice hockey use. Included in this guide are the structures and environment, player's bench and box, penalty benches and box, off-rink official's bench/box, signal and timing devices, dressing rooms, nets, rink floor design, illumination, emergency medical care, and signage.
languageEnglish
titleStandard Guide for Roller Hockey Playing Facilitiesen
titleASTM F2336-17num
typestandard
statusActive
treeASTM - ASTM International:;2024
contenttypefulltext
scope1.1 This guide covers the provisions for consistent safety considerations in the design and construction of new roller hockey rinks in order to reduce potential safety hazards. It is intended to standardize game conditions and establish guidelines that will provide a level of conformity for the purpose of competition and reduce potential hazards to players and game officials. 1.2 This guide should be taken into consideration by architects, designers, engineers, construction contractors, and appropriate inspectors who may be involved in the design and construction of new roller hockey rinks. This guide applies to the development of new arenas and to existing facilities that will be renovated. 1.3 This guide takes into consideration that most ice hockey rinks with concrete surfaces can be acceptable for roller hockey. However, dasher boards must meet criteria respective of the specific activity. Facilities designed and constructed for roller hockey may not be acceptable for ice hockey use. 1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
identifier DOI10.1520/F2336-17R24


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record