Show simple item record

MICROCIRCUITS, DIGITAL, ADVANCED CMOS, PARALLEL D REGISTER WITH ENABLE, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T15:35:48Z
date available2017-09-04T15:35:48Z
date copyright04/17/1992
date issued1992
identifier otherOQQWDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/37740
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of radiation hardness assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
            Device types      Generic number          Circuit function                   01               54AC378      Parallel D register with enable


The device class designator shall be a single letter identifying the product assurance level as follows:
             Device class     Device requirements documentation                     M       Vendor self-certification to the requirements for non-JAN class B                            microcircuits in accordance with 1.2.1 of MIL-STD-883                  B or S     Certification and qualification to MIL-M-38510                  Q or V     Certification and qualification to MIL-I-38535


For device classes M, B, and S, case outline(s) shall meet the requirements in appendix C of MIL-M-38510 and as listed below. For device classes Q and V, case outline(s) shall meet the requirements of MIL-I-38535, appendix C of MIL-M-38510, and as listed below.
    Outline letter                Case outline            E         D-2 (16-lead, .840" × .310" × .200"), dual-in-line package           F         F-5 (16-lead, .440" × .285" × .085"), flat package           2         C-2 (20-terminal, .358" × .358" × .100"), square chip carrier package


The lead finish shall be as specified in MIL-M-35510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finished A, B, and C are considered acceptable and interchangeable without.
  Supply voltage range  - - - - - - - - - - - - - - - -   −0.5 V dc to +6.0 V dc   DC input voltage range- - - - - - - - - - - - - - - -   −0.5 V dc to VCC + 0.5 V dc   DC output voltage range - - - - - - - - - - - - - - -   −0.5 V dc to VCC + 0.5 V dc   Input clamp diode current - - - - - - - - - - - - - -   ±20 mA   Output clamp diode current- - - - - - - - - - - - - -   ±20 mA   DC output current (per output pin)- - - - - - - - - -   ±50 mA   DC VCC or GND current (per output pin)- - - - - - - -   ±50 mA   Storage temperature range - - - - - - - - - - - - - -   −65°C to +150°C   Maximum power dissipation (PD)- - - - - - - - - - - -   500 mW   Lead temperature (soldering, 10 seconds)- - - - - - -   +300°C   Thermal resistance, junction-to-case(ΘJC) - - - - - -   See MIL-M-38510, appendix C   Junction temperature (TJ) 2/  - - - - - - - - - - - -   +175°C


  Supply voltage range (VCC) 3/ - - - - - - - - - - - -   +3.0 V dc to +5.5 V dc   Input voltage range - - - - - - - - - - - - - - - - -   0.0 V dc to VCC   Output voltage range  - - - - - - - - - - - - - - - -   0.0 V dc to VCC   Case operating temperature range(TC)- - - - - - - - -   −55°C to +125°C   Input rise or fall times:     VCC = 3.0 V to 5.5 V  - - - - - - - - - - - - - - -   0 to 8 ns/V   Minimum setup time, data (Dn) to clock (CP), (ts1):     TC = +25°C, VCC = 3.0 V - - - - - - - - - - - - - -   4.0 ns     TC = −55°C, +125°C, VCC = 3.0 V - - - - - - - - - -   4.0 ns     TC = +25°C, VCC = 4.5 V - - - - - - - - - - - - - -   4.0 ns     TC = −55°C, +125°C, VCC = 4.5 V - - - - - - - - - -   4.0 ns   Minimum hold time, Dn to CP, (th1):     TC = +25°C, VCC = 3.0 V - - - - - - - - - - - - - -   4.0 ns     TC = −55°C, +125°C, VCC = 3.0 V - - - - - - - - - -   4.0 ns     TC = +25°C, VCC = 4.5 V - - - - - - - - - - - - - -   4.0 ns     TC = −55°C, +125°C, VCC = 4.5 V - - - - - - - - - -   4.0 ns   Minimum setup time, clock enable ([E bar]) to CP, (ts2):     TC = +25°C, VCC = 3.0 V - - - - - - - - - - - - - -   2.5 ns     TC = −55°C, +125°C, VCC = 3.0 V - - - - - - - - - -   2.5 ns     TC = +25°C, VCC = 4.5 V - - - - - - - - - - - - - -   2.5 ns     TC = −55°C, +125°C, VCC = 4.5 V - - - - - - - - - -   2.5 ns   Minimum hold time, [E bar] to CP, (th2):     TC = +25°C, VCC = 3.0 V - - - - - - - - - - - - - -   4.0 ns     TC = −55°C, +125°C, VCC = 3.0 V - - - - - - - - - -   4.0 ns     TC = +25°C, VCC = 4.5 V - - - - - - - - - - - - - -   4.0 ns     TC = −55°C, +125°C, VCC = 4.5 V - - - - - - - - - -   4.0 ns


  Minimum clock frequency (fMAX):     TC = +25°C, VCC = 3.0 V - - - - - - - - - - - - - -   95 MHz     TC = −55°C, +125°C, VCC = 3.0 V - - - - - - - - - -   95 MHz     TC = +25°C, VCC = 4.5 V - - - - - - - - - - - - - -   95 MHz     TC = −55°C, +125°C, VCC = 4.5 V - - - - - - - - - -   95 MHz   Minimum CP high, low pulse width, :     TC = +25°C, VCC = 3.0 V - - - - - - - - - - - - - -   5.0 ns     TC = −55°C, +125°C, VCC = 3.0 V - - - - - - - - - -   6.5 ns     TC = +25°C, VCC = 4.5 V - - - - - - - - - - - - - -   5.0 ns     TC = −55°C, +125°C, VCC = 4.5 V - - - - - - - - - -   6.5 ns


Fault coverage measurement of manufacturing   logic tests (MIL-STD-883, test method 5012) - - - - -   XX percent 4/


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design application, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-91605num
titleMICROCIRCUITS, DIGITAL, ADVANCED CMOS, PARALLEL D REGISTER WITH ENABLE, MONOLITHIC SILICONen
typestandard
page18
statusActive
treeDLA - CC - DLA Land and Maritime:;1992
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record