درباره ما
DOD-PRF-24574
LUBRICATING FLUID FOR LOW AND HIGH PRESSURE OXIDIZING GAS SYSTEMS
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T15:35:50Z | |
| date available | 2017-09-04T15:35:50Z | |
| date copyright | 09/29/1978 | |
| date issued | 1978 | |
| identifier other | OQTLDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/37787 | |
| description abstract | This specification covers lubricating fluid for use in oxidizing gas systems, including oxygen and compressed air. The lubricating fluid is intended for use with oxygen systems at all pressures, and for air and oil-free nitrogen systems at pressures above 10,300 kilopascals (kPa) (1500 pounds per square inch (1b/in2)). Intended Use: Type I lubricating fluid is intended for use where a moderate viscosity is required at operating temperatures from −46°C (−50°F) to 0°C (32°F), for example, as a crank-case lubricant in compressors for low temperature liquid air distillation plants. Type II lubricating fluid is intended for use where this viscosity is required at operating temperatures from −20°C (−4°F) to 40°C (104°F), for example, as a compressor lubricant within the prescribed temperature range, such as with liquid oxygen transfer pumps. Type III lubricating fluid is intended for use where this viscosity is required at operating temperatures from 20°C (68°F) to 70°C (158°E), for example, as a crankcase lubricant in nominal temperatures within the prescribed temperature range. | |
| language | English | |
| title | DOD-PRF-24574 | num |
| title | LUBRICATING FLUID FOR LOW AND HIGH PRESSURE OXIDIZING GAS SYSTEMS | en |
| type | standard | |
| page | 13 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;1978 | |
| contenttype | fulltext |
