درباره ما
NAVY - YD - Naval Facilities Engineering Command: Recent submissions
Now showing items 41-60 of 126
-
A-A-59218
Abstract: This commercial item description (CID) covers diesel-engine-driven, truck mounted, full revolving, hydraulically operated cranes. -
MIL-STD-3007F
Abstract: Purpose.
This standard establishes procedures for the development and maintenance of Unified Facilities Criteria (UFC) and Unified Facilities Guide Specifications (UFGS) and prescribes their use by the Army, ...Subject(s) : Unified Facilities Guide Specifications , -
SS-C-153C
Abstract: This specification covers bituminous plastic cement for trowel or knife application. Intended Use: The cement covered by this specification is intended for use in the construction and repair of bituminous ... -
MIL-PRF-29163C
Abstract: This specification covers marker buoys that are used with and without mooring (see 6.1). Intended Use: The marker buoys are intended for use as markers for anchors around pontoon causeways and buoyant ...Subject(s) : Barrel shaped , Mooring , Mooring shaped , Peanut shaped , -
A-A-59253
Abstract: This commercial item description (CID) covers plastic pails used for carrying liquid and dry material.Subject(s) : Bails , Integral unit , -
MIL-HDBK-1013/12
Abstract: This handbook is to be used during the engineering design of Department of Defense (DOD) facilities to ensure that engineers and security personnel select the appropriate glazing systems to optimize performance and cost. ... -
MIL-HDBK-1038
Abstract: This handbook provides comprehensive descriptions of the predominant crane types in service at Navy shore facilities. It also outlines the design requirements and the pertinent engineering methodology for design evaluation ... -
A-A-60004
Abstract: This commercial item description (CID) covers self-propelled personnel, telescopic boom type, aerial work platforms (hereinafter referred to as the work platform). The work platform is used for various types of overhead ...Subject(s) : Chassis , Electrical system , Work platform , -
MIL-S-27624B
Abstract: This specification covers one type of explosion-proof toggle switch designed for single pole, single throw operation in class 1, groups C and D hazardous locations, as defined by the NFPA No. 70, National Electrical Code. ... -
MIL-HDBK-1013/1A
Abstract: This handbook is to be used during the engineering design of Department of Defense (DoD) facilities to assure appropriate physical security is included. The guidelines are based upon the best currently available research ... -
MIL-C-3774B
Abstract: This specification covers open crates. Intended Use: Crates covered by this specification are to be used for the shipment of items not requiring the protection of a fully sheathed crate. Care should be taken ...Subject(s) : Bolted Members , Shipping , Struts , -
MIL-HDBK-1195
Abstract: MIL-HDBK-1195 establishes specific criteria for the design and construction of shielded enclosures. The Design Manual 12.1, Electronic Facilities Engineering, establishes the general criteria for the design of ... -
A-A-60003
Abstract: This commercial item description (CID) covers toilet partitions including all pilasters (stiles), panels, doors, fittings, hardware, and fasteners necessary for complete installation.Subject(s) : Ceiling hung toilet enclosure , Overhead braced toilet enclosure , Toilet enclosure , Urinal screen , -
MIL-DTL-20176G
Abstract: This specification covers smooth bore, sewage discharge, and oily waste discharge rubber hose and hose assemblies.
Sewage hose and oily waste will be of the following types, classes, and sizes, as specified (see ...Subject(s) : Adhesion , Burst pressure , Couplings , Crush resistance , Hydrostatic proof pressure , Reinforcement , Tensile pull ,