Show simple item record

MICROCIRCUITS, LINEAR, 4TH ORDER ELLIPTIC NOTCH FILTER, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T15:40:56Z
date available2017-09-04T15:40:56Z
date copyright33514
date issued1991
identifier otherPFGWDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/43182
description abstractThis drawing forms a part of a one part - one pert number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of radiation hardness assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
           Device type           Generic number              Circuit function                  01                   LMF90            4th-order elliptic notch filter


This device class designator shall be a single letter identifying the product assurance level as follows:
             Device class          Device requirements documentation                    M                Vendor self-certification to the requirements for non-JAN                                    class B microcircuits in accordance with 1.2.1 of MIL-STD-883                 B or S              Certification and qualification to MIL-M-38510                 Q or V              Certification and qualification to MIL-I-38535


For device classes M, B, and S, case outline(s) shall meet the requirements in appendix C of MIL-M-38510 and as listed below. For device classes Q and V, case outline(s) shall meet the requirements of MIL-I-38535, appendix C of MIL-M-,38510, and as listed below.
               Outline letter                       Case/outline                       C                 D-1 (14-lead, .785" × .310" × .200"), dual-in-line package


The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
     Supply voltage (V+ to V−) 2/ - - - - - - - - - - - - - - - -    −0.3 V to +16 V      Voltage at any input or output 2/- - - - - - - - - - - - - -    V− −0.3 V to V+ +0.3 V      Input current at any pin  3/ - - - - - - - - - - - - - - - -    5 mA      Package input current (IIN) 3/ - - - - - - - - - - - - - - -    20 mA      Power dissipation (PD) - - - - - - - - - - - - - - - - - - -    500 mW      Storage temperature range  - - - - - - - - - - - - - - - - -    −65°C to +150°C      Lead temperature (soldering, 10 seconds) - - - - - - - - - -    +300°C      Junction temperature (TJ)  - - - - - - - - - - - - - - - - -    +150°C      Thermal resistance, junction-to-case (ΘJC) - - - - - - - - -    See MIL-M-38510, appendix C      Thermal resistance, junction-to-ambient (ΘJA)  - - - - - - -    59° C/W board mounted


     Supply voltage (V+ to V−)- - - - - - - - - - - - - - - - - -    4.0 V to 15.0 V      Ambient operating temperature range (TA) - - - - - - - - - -    −55°C to +125°C


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-90968num
titleMICROCIRCUITS, LINEAR, 4TH ORDER ELLIPTIC NOTCH FILTER, MONOLITHIC SILICONen
typestandard
page18
statusActive
treeDLA - CC - DLA Land and Maritime:;1991
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record