Show simple item record

MICROCIRCUIT, DIGITAL, RADIATION HARDENED CMOS, PRESETTABLE UP/DOWN COUNTERS, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T15:42:22Z
date available2017-09-04T15:42:22Z
date copyright35779
date issued1997
identifier otherPJHBEAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/44672
description abstractThis appendix establishes minimum requirements for microcircuit die to be supplied under the Qualified Manufacturers List (QML) Program. QML microcircuit die meeting the requirements of MIL-PRF-38535 and the manufacturers approved QM plan for use in monolithic microcircuits, multichip modules (MCMs), hybrids, electronic modules, or devices using chip and wire designs in accordance with MIL-PRF-38534 are specified herein. Two product assurance classes consisting of military high reliability (device class Q) and space application (device Class V) are reflected in the Part or Identification Number (PIN). When available a choice of Radiation Hardiness Assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes Q and V RHA identified die shall meet the MIL-PRF-38535 specified RHA levels. A dash (-) indicates a non-RHA die.
The device type(s) shall identify the circuit function as follows:
           Device type    Generic number              Circuit function                 01            4510B           Radiation Hardened, CMOS, presettable                                              BCD up/down counter.                 02            4516B           Radiation Hardened, CMOS, presettable                                              binary up/down counter.                 03            4516BN          Radiation Hardened, CMOS, presettable                                              binary up/down counter, neutron irradiated die.


           Device class             Device requirements documentation                Q or V                Certification and qualification to the die requirements of MIL-PRF-38535.


The die details designation shall be a unique letter which designates the die's physical dimensions, bonding pad location(s) and related electrical function(s), interface materials, and other assembly related information, for each product and variant supplied to this appendix.
             Die Types                       Figure number                   01                               A-1                  02, 03                           A-2


             Die Types                       Figure number                   01                               A-1                  02, 03                           A-2


             Die Types                       Figure number                   01                               A-1                  02, 03                           A-2


                 01                               A-1                  02, 03                           A-2


See paragraph 1.3 within the body of this drawing for details.
See paragraph 1.4 within the body of this drawing for details.
Intended Use: Microcircuit die conforming to this drawing are intended for use in microcircuits built in accordance with MIL-PRF-38535 or MIL-PRF-38534 for government microcircuit applications (original equipment), design applications and logistics purposes.
languageEnglish
titleSMD-5962-96657 REV Anum
titleMICROCIRCUIT, DIGITAL, RADIATION HARDENED CMOS, PRESETTABLE UP/DOWN COUNTERS, MONOLITHIC SILICONen
typestandard
page26
statusActive
treeDLA - CC - DLA Land and Maritime:;1997
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record