Show simple item record

MICROCIRCUIT, DIGITAL, 32-BIT CASCADABLE BARREL SHIFTER, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T15:48:01Z
date available2017-09-04T15:48:01Z
date copyright33906
date issued1992
identifier otherPZWWDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/50911
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.5 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of radiation hardness assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
       Device type         Generic number             Circuit function               Nanoseconds             01                  LSH32          32-bit cascadable barrel shifter          50 ns            02                  LSH32          32-bit cascadable barrel shifter          40 ns


The device class designator shall be a single letter identifying the product assurance level as follows:
      Device class          Device requirements documentation              M               Vendor self-certification to the requirements for non-JAN class B                             microcircuits in accordance with 1.2.1 of MIL-STD-883            B or S            Certification and qualification to MIL-M-38510            Q or V            Certification and qualification to MIL-I-38535


For device classes M, B, and S, case outline(s) shall meet the requirements in appendix C of MIL-M-38510 and as listed below. For device classes Q and V, case outline(s) shall meet the requirements of MIL-I-38535, appendix C of MIL-M-38510, and as listed below.
        Outline letter                           Case outline                X             C-7 (68-terminal, .962" × .962" × .120") square leadless chip carrier package               Y             P-AC (68-pin SQ. 1.180" × 1.180" × .345") square pin grid array package


The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
      Storage temperature - - - - - - - - - - - - - - - - - - -   −65°C to +150°C       VCC supply voltage with respect to ground - - - - - - - -   −0.5 V to +7.0 V       Input signal with respect to ground - - - - - - - - - - -   −0.5 V to VCC + 0.5       Signal applied to high impedance output - - - - - - - - -   −0.5 V to VCC + 0.5       Output current into low outputs - - - - - - - - - - - - -   25 mA       Maximum power dissipation - - - - - - - - - - - - - - - -   165 mW       Thermal resistance, junction to case (θJC)  - - - - - - -   See MIL-M-38510, appendix C


      Supply voltage range (VCC)  - - - - - - - - - - - - - - -   4.50 V ≤ VCC ≤ 5.50 V       Ambient operating temperature range (TA)  - - - - - - - -   −55°C to +125°C


      Fault coverage measurement of manufacturing         logic tests (MIL-STD-883, test method 5012)   - - - - -   XX percent  2/


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-89717 REV Anum
titleMICROCIRCUIT, DIGITAL, 32-BIT CASCADABLE BARREL SHIFTER, MONOLITHIC SILICONen
typestandard
page19
statusActive
treeDLA - CC - DLA Land and Maritime:;1992
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record