Show simple item record

MICROCIRCUIT, DIGITAL, CMOS, 32-BIT MICROPROCESSOR, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T15:52:58Z
date available2017-09-04T15:52:58Z
date copyright06/20/1994
date issued1994
identifier otherQOHYDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/56282
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes Q and M) and space application (device class V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: ILLUSTRATION
Device class M RHA marked devices shall meet the MIL-I-38535 appendix A specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
     Device type                     Generic number                                Circuit function            01                             80386SX-16                             32-Bit Microprocessor           02                             80386SX-20                             32-Bit Microprocessor


The device class designator shall be a single letter identifying the product assurance level as follows:
        Device class                          Device requirements documentation               M                             Vendor self-certification to the requirements for non-JAN class B                                            microcircuits in accordance with 1.2.1 of MIL-STD-883             Q or V                          Certification and qualification to MIL-I-38535


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
        Outline letter          Descriptive designator          Terminals          Package style                X                        CMGA5-P88                    88             Pin Grid Array


The lead finish shall be as specified in MIL-STD-883 (see 3.1 herein) for class M or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
     Storage Temperature Range  . . . . . . . . . . . . . . . −65°C to +150°C      Supply Voltage with respect to Ground  . . . . . . . . . −0.5V dc to 6.5 V dc      Voltage on Any Pin with respect to Ground  . . . . . . . −0.5V dc to VCC + 0.5 V dc      Maximum Power Dissipation  . . . . . . . . . . . . . . . 1.6W      Lead Temperature (soldering 10 seconds)  . . . . . . . . 300°C      Thermal Resistance, Junction-to-case (OJC):        Case Y . . . . . . . . . . . . . . . . . . . . . . . . See MIL-STD-1835      Junction temperature (TJ)  . . . . . . . . . . . . . . . + 150°C


     Case Operating Temperature Range . . . . . . . . . . . . −55°C to +125°C      Supply Voltage, Vcc  . . . . . . . . . . . . . . . . . . 4.75 V dc to 5.25 V dc      Frequency of operation:         Device 01 . . . . . . . . . . . . . . . . . . . . . . 16 MHz         Device 02 . . . . . . . . . . . . . . . . . . . . . . 20 MHz


     Fault coverage measurement of manufacturing        logic tests (MIL-STD-883, test method 5012)  . . . . . 98.5 percent


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-94533num
titleMICROCIRCUIT, DIGITAL, CMOS, 32-BIT MICROPROCESSOR, MONOLITHIC SILICONen
typestandard
page20
statusActive
treeDLA - CC - DLA Land and Maritime:;1994
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record