Show simple item record

MICROCIRCUIT, DIGITAL, HCMOS, 8-BIT ERROR CORRECTING REED-SOLOMON CODEC, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T15:53:38Z
date available2017-09-04T15:53:38Z
date copyright34325
date issued1993
identifier otherQQAYDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/56937
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes Q and M) and space application (device class V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device class M RNA marked devices shall meet the MIL-I-38535 appendix A specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
         Device type       Generic number             Circuit function                01               64710-33       8-Bit error correcting Reed-Solomon                                               encoder/decoder               02               64710-25       8-Bit error correcting Reed-Solomon                                               encoder/decoder


The device class designator shall be a single letter identifying the product assurance level as follows:
         Device class                             Device requirements documentation                M                     Vendor self-certification to the requirements for non-JAN class B                                     microcircuits in accordance with 1.2.1 of MIL-STD-883              Q or V                  Certification and qualification to MIL-I-38535


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
         Outline letter         Descriptive designator       Terminals          Package style                 X                       CMGA15-P68                68            Pin grid array


The lead finish shall be as specified in MIL-STD-883 (see 3.1 herein) for class M or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
  DC supply voltage (VDD) . . . . . . . . . . . . . . . . . .  −0.3 V dc to +7.0 V dc   Input voltage (VIN) . . . . . . . . . . . . . . . . . . . .  −0.3 V to VDD + 9.3 V   DC input current (VIN)  . . . . . . . . . . . . . . . . . .  ±10 mA   Storage temperature range . . . . . . . . . . . . . . . . .  −65°C to +150°C   Lead temperature (soldering 10 seconds) . . . . . . . . . .  +275°C   Junction temperature (TJ) . . . . . . . . . . . . . . . . .  +160°C   Power dissipation (PD)  . . . . . . . . . . . . . . . . . .  1.8 W   Thermal resistance, Junction-to-case (θJC)  . . . . . . . .  2°C/W


  DC supply voltage (VDD) . . . . . . . . . . . . . . . . . .  +4.0 V dc to +6.0 V dc   Operating ambient temperature range (TA)  . . . . . . . . .  −55°C to +125°X   Input high voltage range (VIH)  . . . . . . . . . . . . . .  2.25 V minimum   Input low voltage range (VIL) . . . . . . . . . . . . . . .  0.8 V maximum


    Fault coverage measurement of manufacturing       logic tests (MIL-STD-883, test method 5012) . . . . . . .  XX percent 2/


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-92171num
titleMICROCIRCUIT, DIGITAL, HCMOS, 8-BIT ERROR CORRECTING REED-SOLOMON CODEC, MONOLITHIC SILICONen
typestandard
page16
statusActive
treeDLA - CC - DLA Land and Maritime:;1993
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record