Show simple item record

COMPOSITION CH-6

contributor authorNAVY - OS - Naval Surface Warfare Center (NSWCIHEODTD)
date accessioned2017-09-04T15:56:08Z
date available2017-09-04T15:56:08Z
date copyright02/08/1994
date issued1994
identifier otherQXAYDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/59486
description abstractThis specification establishes the requirements for an explosive designated as Composition CH-6.
Explosive Composition CH-6 shall have the following classes:
    Class 1   -   Composition CH-6 which is subjected to calibration                   testing with a lower sensitivity level of 3.5                   decibang (DBg) and an upper sensitivity level of 6.0                   DBg.      Class 2   -   Composition CH-6 which has the same fixed lower                   sensitivity level (3.5 DBg) as the Class 1 material                   when subjected to calibration testing but a different                   value for the upper sensitivity. This value shall be                   specified at the time of procurement.


Intended Use: The CH-6 Explosive is to be used in explosive loads and boosters for various Navy fuzes.
languageEnglish
titleMIL-C-21723Bnum
titleCOMPOSITION CH-6en
typestandard
page24
statusActive
treeNAVY - OS - Naval Surface Warfare Center (NSWCIHEODTD):;1994
contenttypefulltext
subject keywordsAcceptor body
subject keywordsAttenuator
subject keywordsCalcium chloride anhydrous
subject keywordsDensity
subject keywordsDonor assembly
subject keywordsExplosive properties assembly
subject keywordsFlow characteristics
subject keywordsFunctioning characteristics
subject keywordsGraphite
subject keywordsPellets
subject keywordsPolyisobutylene
subject keywordsPowder mobility test fixture
subject keywordsRDX
subject keywordsSensitivity
subject keywordsSieves; standard
subject keywordstesting
subject keywordsSodium stearate
subject keywordsWestphal balance


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record