درباره ما
MIL-I-24783
ISOLATOR, RING TYPE, PRESSURE, FOR SHIPBOARD SEWAGE SERVICE
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T15:58:37Z | |
| date available | 2017-09-04T15:58:37Z | |
| date copyright | 04/15/1993 | |
| date issued | 1993 | |
| identifier other | RDDXDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/61737 | |
| description abstract | This specification covers the requirements for ring and flanged spool type isolators, installed between pipe flanges, to isolate pressure and vacuum gauges from clogging by sediment and solids in shipboard sewage systems. Intended Use: Gauge isolators covered by this specification are intended for installation in fluid systems that contain large amounts of sediment or solids. The isolators protect pressure and vacuum gauges from clogging or providing inaccurate readings. The isolator full bore design does not restrict fluid flow and the smooth interior reduces sediment buildup. Dial ranges of isolator and gauge sets for shipboard sewage service are generally as follows: Pressure 0-60 lb/in2 0-100 lb/in2 Compound pressure 30 inches hg - 50 lb/in2 30 inches hg - 100 lb/in2 Vacuum pressure 30 inches hgIsolators specified herein are not suitable for installation in pipe systems with raised face flanges. | |
| language | English | |
| title | MIL-I-24783 | num |
| title | ISOLATOR, RING TYPE, PRESSURE, FOR SHIPBOARD SEWAGE SERVICE | en |
| type | standard | |
| page | 18 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;1993 | |
| contenttype | fulltext | |
| subject keywords | Chemical isolator | |
| subject keywords | Diaphragm seal type isolator | |
| subject keywords | Gauge isolator | |
| subject keywords | Instrument isolator |
