MIL-DTL-20078D

GASKET, FOR BALLISTIC DOORS AND HATCHES

contributor author	NAVY - SH - Naval Sea Systems Command (Ship Systems)
date accessioned	2017-09-04T15:59:52Z
date available	2017-09-04T15:59:52Z
date copyright	09/10/2004
date issued	2004
identifier other	RGPEGBAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/63006
description abstract	This specification establishes the requirements for metal inserted rubber gaskets and two-line rubber gaskets for ballistic doors and hatches (see 6.1). Intended Use: Types A-1 and A-2 gaskets are intended for use where tightness is desired between two flat surfaces, and are designed to be fastened by American National Standard No. 10 screws and cemented to hatch covers or ballistics doors by a non-hardening acetone cement. Type B gaskets are fitted to retainer strips and secured with adhesive, ⅛ inch by ⅝-inch flat bar and No. 10 screws. These gaskets are of interest to the US Navy because they are used with shipboard unique enclosures that have rigorous performance requirements.
language	English
title	MIL-DTL-20078D	num
title	GASKET, FOR BALLISTIC DOORS AND HATCHES	en
type	standard
page	10
status	Active
tree	NAVY - SH - Naval Sea Systems Command (Ship Systems):;2004
contenttype	fulltext
subject keywords	Adhesion
subject keywords	Metal strip
subject keywords	Rubber
subject keywords	Sealing Pressure