MIL-DTL-11484/58D

Abstract

This specification is approved for use by all Departments and Agencies of the Department of Defense. <br>The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of MIL-DTL-11484 listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation. <a><img alt="FIGURE" /></a> </span><pre>MATERIAL: Gilding Medal DIMENSIONS: DIAMETER: 19/32 inch (1.51 cm) (REF) THICKNESS (At Edge): 0.045 inch &#177; 0.005 inch (0.114 cm &#177; 0.012 cm) FINISH: RIM, LETTERS AND SHIELD: Hard Enameled, Gold Plated, Mirror-like Polished and shall match TIOH Metal Finish Chip Number 6. RECESSED AREA BETWEEN RIM AND SHIELD: Gold Plated, Matte Finish and shall match TIOH Metal Finish Chip Number 7.</pre> <br> <br>NOTES: <br>1. The term (REF) refers to the measurements taken from the Government furnished hub or die. <br>2. Enameled areas shall be blue as indicated. The color shall conform to the TIOH color chip number 20 or the standard sample. <br>3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the manufacturer. <br>4. Attaching device shall be prong with pick and flat ball type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. <br>CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. <br>