MS27070 REV E
SLEEVE, HOSE COUPLING
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T16:03:52Z | |
| date available | 2017-09-04T16:03:52Z | |
| date copyright | 05/01/2013 | |
| date issued | 2013 | |
| identifier other | RRUTCFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/67199 | |
| description abstract | Intended Use: This part is a component of MS27053 through MS27060 and MS27381 through MS27385. Material. Corrosion-resistant steel, 17-4PH in accordance with SAE-AMS5643. Heat treat to condition H-1150 with hardness of Rockwell C-28 to C-37 or condition H-1075 with hardness of Rockwell C-31 to C-38. Hardness to be tested on surface indicated when sleeve is heat treated in the final machined configuration. Finish. Passivate in accordance with SAE-AMS2700 method 1, type 1 or 2. Do not dry-film lubricant sizes 4, -5, and -6. On other sizes, dry-film lubricate radius Y and angle U; dry-film lubrication on D diameter and F diameter is acceptable; dry-film lubrication on taper AD not acceptable; and dry film lubrication beyond AE dimension on size -24 is not acceptable. Dryfilm lubricate, NOTE: Avoid using graphite dry film lubes with aluminum sleeves because in a wet environment, graphite becomes corrosive to the aluminum. | |
| language | English | |
| title | MS27070 REV E | num |
| title | SLEEVE, HOSE COUPLING | en |
| type | standard | |
| page | 8 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;2013 | |
| contenttype | fulltext |

درباره ما