درباره ما
IEEE C37.30
Standard Requirements for High-Voltage Switches
| contributor author | IEEE - The Institute of Electrical and Electronics Engineers, Inc. | |
| date accessioned | 2017-09-04T16:04:42Z | |
| date available | 2017-09-04T16:04:42Z | |
| date copyright | 09/16/1997 | |
| date issued | 1997 | |
| identifier other | RTVOCAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/67919 | |
| description abstract | Overview This standard applies to all high-voltage enclosed indoor or outdoor, and non-enclosed indoor or outdoor, switches rated in excess of 1000 V. This includes such switch types as disconnecting, selector, horn-gap, grounding, etc., for manual or power operation. The following switch types are not covered by this standard: distribution-enclosed, singlepole switches and distribution cutouts fitted with disconnecting blades; switches used in metal-enclosed gear covered by IEEE Std C37.20.2-1993, IEEE Std C37.20.3-1987, and IEEE Std C37.20.4-1996; and switches used in padmounted switchgear covered by IEEE Std C37.71-1984, ANSI C37.72-1987, and PC37.73 (Draft 8, Feb. 95). NOTE — PC37.39, Proposed Standard for Interrupter Switches, is currently under development. Upon its approval and publication, all references to interrupter switches in this standard will be superseded. This standard defines terms and words that uniquely apply to high-voltage switches and are not included in IEEE Std C37.100-1992. It also defines terms used for rating high-voltage switches and ratings that must be included on nameplates for high-voltage switches. | |
| language | English | |
| title | IEEE C37.30 | num |
| title | Standard Requirements for High-Voltage Switches | en |
| type | standard | |
| page | 18 | |
| status | Active | |
| tree | IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;1997 | |
| contenttype | fulltext | |
| subject keywords | high-voltage switches |
