Show simple item record

Lessons Learned Shuttle Orbiter Airlock Hatch Failure Caused By Loose Screw On STS-80 Prevented Two Planned Mission EVAs

contributor authorNASA - National Aeronautics and Space Administration (NASA)
date accessioned2017-09-04T16:05:06Z
date available2017-09-04T16:05:06Z
date copyright08/01/2011
date issued2011
identifier otherRVEONEAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/68382
description abstractDuring the Space Shuttle STS-80 mission, the two planned Extravehicular Activities (EVA) were scrubbed when the astronauts discovered that the outer airlock hatch would not open. This impacted the plan to evaluate the EVA tools that would be used for the construction and maintenance of the International Space Station.
Upon return from the mission, troubleshooting revealed that the airlock actuator that is used for latching and unlatching the hatch was defective. This actuator was removed and replaced. Troubleshooting on the removed actuator revealed that a small screw had come loose from an internal assembly and lodged in the planetary gears of the actuator. Space Shuttle Program Corrective Action Record Number AE0959-010 documented this problem. The Failure/Problem Report Number NSLAD-RE-97-044 documented the actuator findings. Both of these reports are attached to this Lesson Learned input.
languageEnglish
titleNASA-LLIS-4417num
titleLessons Learned Shuttle Orbiter Airlock Hatch Failure Caused By Loose Screw On STS-80 Prevented Two Planned Mission EVAsen
typestandard
page4
statusActive
treeNASA - National Aeronautics and Space Administration (NASA):;2011
contenttypefulltext
subject keywordsEngineering design and project processes and standards
subject keywordsLander Systems
subject keywordsLaunch Systems
subject keywordsLevel II/III requirements definition
subject keywordsLogistics and maintenance


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record