Show simple item record

MICROCIRCUIT, DIGITAL, CMOS 16 X 16 MULTIPLIER, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:06:53Z
date available2017-09-04T16:06:53Z
date copyright09/17/1993
date issued1993
identifier otherRZUXDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/70118
description abstractThis drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices.
The complete PIN shall be as shown in the following example: CHART
The device type(s) shall identify the circuit function as follows:
   Device type     Generic number           Circuit function        Multiply time          01       7C516-42, 7216L40         16 × 16 multiplier          42 ns         02       7C516-55, 7216L55         16 × 16 multiplier          55 ns         03       7C516-75, 7216L75         16 × 16 multiplier          75 ns         04       7C516-30, 7216L30         16 × 16 multiplier          30 ns         05       7216L25                   16 × 16 multiplier          25 ns         06       7216L20                   16 × 16 multiplier          20 ns


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
   Outline letter        Descriptive designator        Terminals           Package style           X                      CDIP1-T64                  64        Dual-in-line package          Y                      CQCC1-N58                  68        Square chip carrier          Z 1/                   CMGA15-PN                  68        Pin grid array          U                      See figure 1               64        Quad flat package


The lead finish shall be as specified in MIL-M-38510. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
   Supply voltage range - - - - - - - - - - - -    −0.5 V dc to +7.0 V dc    DC voltage applied to outputs- - - - - - - -    −0.5 V dc to +7.0 V dc    DC input voltage - - - - - - - - - - - - - -    −0.5 V dc to +7.0 V dc    DC output current- - - - - - - - - - - - - -    10 mA    Maximum power dissipation 3/ - - - - - - - - -   1.2 W    Lead temperature (soldering, 10 seconds) - -     +300°C    Thermal resistance, junction-to-case (0JC):      Cases X, Y, and Z- - - - - - - - - - - - -    See MIL-STD-1835      Case U - - - - - - - - - - - - - - - - - -    30°C/W    Junction temperature (TJ)- - - - - - - - - -    +175°C    Storage temperature range- - - - - - - - - -    −65°C to +150°C


Supply voltage (VCC)- - - - - - - - - - - - - -    +4.5 V dc to +5.5 V dc Ground voltage (GRD)- - - - - - - - - - - - - -    0 V dc Input high voltage (VIH)- - - - - - - - - - - -    2.0 V dc to 6.0 V dc Input low voltage (VIL) - - - - - - - - - - - -    −0.5 V dc to +0.8 V dc Case operating temperature range (TC) - - - - -    −55°C to +125°C


Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for original equipment manufacturer application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
languageEnglish
titleSMD-5962-86873 REV Bnum
titleMICROCIRCUIT, DIGITAL, CMOS 16 X 16 MULTIPLIER, MONOLITHIC SILICONen
typestandard
page24
statusActive
treeDLA - CC - DLA Land and Maritime:;1993
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record