Show simple item record

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CONVOLUTED, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:07:07Z
date available2017-09-04T16:07:07Z
date copyright01/23/2013
date issued2013
identifier otherSAKRBFAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/70342
description abstractThis specification contains the requirements for medium pressure, high temperature, convoluted polytetrafluoroethylene (PTFE) hose assemblies, reinforced with a corrosion-resistant steel (CRES) wire braid for use in fuel, lubricating oil, water-alcohol, hydraulics and pneumatic systems within the limits specified herein.Intended Use: The hose assembly covered by this specification is military unique to meet the requirements specified herein and in the applicable specification sheets. The hose in accordance with MIL-DTL-32435 for field attachable fitting assemblies should be mated with either reusable fittings qualified in accordance with MIL-DTL-27272 or with permanent fittings to meet the requirements specified herein and in the applicable specification sheet. It is recommended that this hose assembly should not be used in pneumatic storage system applications and in any applications that exceed the operating temperature range and pressure specified herein. Hose assembly sizes -20Z and -24Z should not be used in systems where the peak pressures are greater than 1000 psi (7MPa). Hose assembly size -3/-4 is not intended for use in aircraft hydraulic systems.
languageEnglish
titleMIL-DTL-32434num
titleHOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CONVOLUTED, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL SPECIFICATION FORen
typestandard
page23
statusActive
treeDLA - CC - DLA Land and Maritime:;2013
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record