Show simple item record

MICROCIRCUITS, DIGITAL, FAST, 9-BIT BUFFERED NON-INVERTING LATCH, THREE-STATE OUTPUT, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:07:11Z
date available2017-09-04T16:07:11Z
date copyright03/16/1992
date issued1992
identifier otherSAPWDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/70415
description abstractThis drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices".
The complete PIN shall be as shown in the following example: CHART
The device type(s) shall identify the circuit function as follows:
      Device type                Generic number                     Circuit function            01                        54FCT843A              9-bit buffered non-inverting latch,                                                            with three-state output, TTL compatible           02                        54FCT843B              9-bit buffered non-inverting latch, with                                                            three-state output, TTL compatible           03                        54FCT843C              9-bit buffered non-inverting latch, with                                                      three-state output, TTL compatible


The case outline(s) shall be as designated in appendix C of MIL-M-38510, AND AS FOLLOWS:
        Outline letter                                 Case outline                K                 F-6 (24 lead, .640" × .420" × .090"), flat package               L                 D-9 (24 lead, 1.280" × .310" × .200"), dual-in-line package               3                 C-4 (28-terminal, .460" × .460" × .100"), square chip carrier package


   Supply voltage range - - - - - - - - - - - - - - - -     −0.5 V dc to +7.0 V dc    Input voltage range- - - - - - - - - - - - - - - - -     −0.5 V dc to VCC + 0.5 V dc 2/    Output voltage range - - - - - - - - - - - - - - - -     −0.5 V dc to VCC + 0.5 V dc 2/    DC input diode current (IIK) - - - - - - - - - - - -     −20 mA    DC output diode current (IOK)- - - - - - - - - - - -     −0.5 mA    DC output current  - - - - - - - - - - - - - - - - -     ±100 mA    Maximum power dissipation (PD)  3/ - - - - - - - - -     500 mW    Thermal resistance, junction to case (ΘJC) - - - - -     See MIL-M-38510, appendix C    Storage temperature range- - - - - - - - - - - - - -     −65°C to +150°C    Junction temperature (TJ)- - - - - - - - - - - - - -     +175°C    Lead temperature (soldering, 10 seconds) - - - - - -     +300°C


   Supply voltage range (VCC) - - - - - - - - - - - - -     +4.5 V dc to +5.5 V dc    Input voltage range (VIN)  - - - - - - - - - - - - -     0.0 V dc to VCC    Output voltage range (VOUT)  - - - - - - - - - - - -     0.0 V dc to VCC    Maximum low level input voltage (VIL)  - - - - - - -     0.8 V dc    Minimum high level input voltage (VIH) - - - - - - -     2.0 V dc    Case operating temperature range (TC)- - - - - - - -     −55°C to +125°C


Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
languageEnglish
titleSMD-5962-89758num
titleMICROCIRCUITS, DIGITAL, FAST, 9-BIT BUFFERED NON-INVERTING LATCH, THREE-STATE OUTPUT, MONOLITHIC SILICONen
typestandard
page16
statusActive
treeDLA - CC - DLA Land and Maritime:;1992
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record